m3ulcb/h3ulcb in lab need firmware update
Description
Environment
Activity
Corentin Labbe March 10, 2020 at 10:07 AM
board passing health check in the lab
Corentin Labbe March 10, 2020 at 9:49 AM
after upgrade
[ 0.000148] NOTICE: BL2: R-Car H3 Initial Program Loader(CA57)
[ 0.004585] NOTICE: BL2: Initial Program Loader(Rev.2.0.4)
[ 0.010118] NOTICE: BL2: PRR is R-Car H3 Ver.3.0
[ 0.014787] NOTICE: BL2: Board is Starter Kit Rev.2.0
[ 0.019899] NOTICE: BL2: Boot device is HyperFlash(80MHz)
[ 0.025326] NOTICE: BL2: LCM state is CM
[ 0.029365] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
[ 0.035342] NOTICE: BL2: CH0: 0x400000000 - 0x47fffffff, 2 GiB
[ 0.041204] NOTICE: BL2: CH1: 0x500000000 - 0x57fffffff, 2 GiB
[ 0.047079] NOTICE: BL2: CH2: 0x600000000 - 0x67fffffff, 2 GiB
[ 0.052954] NOTICE: BL2: CH3: 0x700000000 - 0x77fffffff, 2 GiB
[ 0.058844] NOTICE: BL2: DDR3200(rev.0.37)
[ 0.074162] NOTICE: BL2: [COLD_BOOT]
[ 0.083717] NOTICE: BL2: DRAM Split is 4ch(DDR f)
[ 0.087017] NOTICE: BL2: QoS is default setting(rev.0.11)
[ 0.092460] NOTICE: BL2: DRAM refresh interval 1.95 usec
[ 0.097816] NOTICE: BL2: Periodic Write DQ Training
[ 0.102848] NOTICE: BL2: v1.5(release):236f8fb-dirty
[ 0.107753] NOTICE: BL2: Built : 13:10:47, Feb 19 2020
[ 0.112940] NOTICE: BL2: Normal boot
[ 0.116581] NOTICE: BL2: dst=0xe6324100 src=0x8180000 len=512(0x200)
[ 0.122968] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
[ 0.129589] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
[ 0.136814] NOTICE: BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000)
[ 0.151639] NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)
[ 0.165612] NOTICE: BL2: Booting BL31
U-Boot 2018.09 (Feb 19 2020 - 13:12:07 +0000)
CPU: Renesas Electronics R8A7795 rev 3.0
Model: Renesas H3ULCB board based on r8a7795 ES2.0+ with 8GiB (4 x 2 GiB)
DRAM: 7.9 GiB
Bank #0: 0x048000000 - 0x0bfffffff, 1.9 GiB
Bank #1: 0x500000000 - 0x57fffffff, 2 GiB
Bank #2: 0x600000000 - 0x67fffffff, 2 GiB
Bank #3: 0x700000000 - 0x77fffffff, 2 GiB
Corentin Labbe March 10, 2020 at 8:42 AM
We have the H3 8G version
U-Boot 2015.04 (Sep 03 2018 - 14:33:48)
CPU: Renesas Electronics R8A7795 rev 3.0
Board: H3ULCB
I2C: ready
DRAM: 7.9 GiB
Bank #0: 0x048000000 - 0x0bfffffff, 1.9 GiB
Bank #1: 0x500000000 - 0x57fffffff, 2 GiB
Bank #2: 0x600000000 - 0x67fffffff, 2 GiB
Bank #3: 0x700000000 - 0x77fffffff, 2 GiB
Corentin Labbe March 10, 2020 at 8:41 AM
Before upgrade
[ 0.000158] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.21
[ 0.005720] NOTICE: BL2: PRR is R-Car H3 Ver.3.0
[ 0.010384] NOTICE: BL2: Board is Starter Kit Rev.---
[ 0.015504] NOTICE: BL2: Boot device is HyperFlash(80MHz)
[ 0.020930] NOTICE: BL2: LCM state is CM
[ 0.024969] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
[ 0.030945] NOTICE: BL2: CH0: 0x400000000 - 0x480000000, 2 GiB
[ 0.036806] NOTICE: BL2: CH1: 0x500000000 - 0x580000000, 2 GiB
[ 0.042681] NOTICE: BL2: CH2: 0x600000000 - 0x680000000, 2 GiB
[ 0.048557] NOTICE: BL2: CH3: 0x700000000 - 0x780000000, 2 GiB
[ 0.054445] NOTICE: BL2: DDR3200(rev.0.33)NOTICE: [COLD_BOOT]NOTICE: ..0
[ 0.100066] NOTICE: BL2: DRAM Split is 4ch(DDR f)
[ 0.104554] NOTICE: BL2: QoS is default setting(rev.0.07)
[ 0.109997] NOTICE: BL2: DRAM refresh interval 1.95 usec
[ 0.115415] NOTICE: BL2: Lossy Decomp areas
[ 0.119588] NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
[ 0.126672] NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
[ 0.133585] NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
[ 0.140499] NOTICE: BL2: v1.4(release):15dba6b
[ 0.144989] NOTICE: BL2: Built : 05:32:00, Sep 3 2018
[ 0.150177] NOTICE: BL2: Normal boot
[ 0.153823] NOTICE: BL2: dst=0xe6323d00 src=0x8180000 len=512(0x200)
[ 0.160205] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
[ 0.166825] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
[ 0.174056] NOTICE: BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000)
[ 0.188879] NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)
Jan-Simon Moeller March 5, 2020 at 11:35 AM
They are part of the build.
Check for m3:
https://mirrors.edge.kernel.org/AGL/release/icefish/9.0.0/m3ulcb-nogfx/deploy/images/m3ulcb/
and for h3:
https://mirrors.edge.kernel.org/AGL/release/icefish/9.0.0/h3ulcb-nogfx/deploy/images/h3ulcb/
Details
Details
Assignee
Reporter
Priority
Major
https://lava.automotivelinux.org/scheduler/job/10396#L708
[ 1.659608] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.75-ltsi-yocto-standard #1 [ 1.667344] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT) [ 1.675340] task: ffff8007368a8000 task.stack: ffff000008068000 [ 1.681260] PC is at rpc_wait+0x28/0x80 [ 1.685089] LR is at rpc_wait+0x18/0x80 [ 1.688918] pc : [<ffff000008644610>] lr : [<ffff000008644600>] pstate: 20000045 [ 1.696306] sp : ffff00000806bbe0 [ 1.699613] x29: ffff00000806bbe0 x28: 0000000000000000 [ 1.704921] x27: 0000000000000000 x26: ffff00000919fd78 [ 1.710229] x25: ffff000009100358 x24: 0000000000000000 [ 1.715535] x23: ffff800734c6a600 x22: ffff8007353cac10 [ 1.720842] x21: 0000000000000000 x20: ffff800734c65e18 [ 1.726148] x19: ffff800734c65e18 x18: 00000000fffffffb [ 1.731455] x17: 0000000000000122 x16: ffff800734c835d0 [ 1.736762] x15: 0000000061c96bc5 x14: 0000000000000400 [ 1.742068] x13: 0000000000000400 x12: 0000000000000030 [ 1.747374] x11: 0000000000000006 x10: 0101010101010101 [ 1.752680] x9 : fffffffffffffffb x8 : 7f7f7f7f7f7f7f7f [ 1.757986] x7 : fefefeff646c606d x6 : 02000f00ec808080 [ 1.763292] x5 : 00000000000000c0 x4 : 0000000000000000 [ 1.768598] x3 : 0000000000000000 x2 : ffff0000091b7000 [ 1.773905] x1 : 0000000000000000 x0 : 00000000fffee185 [ 1.779212] Process swapper/0 (pid: 1, stack limit = 0xffff000008068000) [ 1.785905] Call trace: [ 1.788346] Exception stack(0xffff00000806baa0 to 0xffff00000806bbe0) [ 1.794780] baa0: 00000000fffee185 0000000000000000 ffff0000091b7000 0000000000000000 [ 1.802603] bac0: 0000000000000000 00000000000000c0 02000f00ec808080 fefefeff646c606d [ 1.810426] bae0: 7f7f7f7f7f7f7f7f fffffffffffffffb 0101010101010101 0000000000000006 [ 1.818248] bb00: 0000000000000030 0000000000000400 0000000000000400 0000000061c96bc5 [ 1.826070] bb20: ffff800734c835d0 0000000000000122 00000000fffffffb ffff800734c65e18 [ 1.833893] bb40: ffff800734c65e18 0000000000000000 ffff8007353cac10 ffff800734c6a600 [ 1.841715] bb60: 0000000000000000 ffff000009100358 ffff00000919fd78 0000000000000000 [ 1.849537] bb80: 0000000000000000 ffff00000806bbe0 ffff000008644600 ffff00000806bbe0 [ 1.857359] bba0: ffff000008644610 0000000020000045 0000000000000000 ffff0000084a0478 [ 1.865181] bbc0: ffffffffffffffff ffff0000084a0494 ffff00000806bbe0 ffff000008644610 [ 1.873003] [<ffff000008644610>] rpc_wait+0x28/0x80 [ 1.877875] [<ffff000008644ec0>] rpc_hf_mode_ext+0x18/0xe8 [ 1.883354] [<ffff00000864597c>] rpc_hf_probe+0xc4/0x318 [ 1.888663] [<ffff000008597310>] platform_drv_probe+0x58/0xb8 [ 1.894404] [<ffff0000085955f8>] driver_probe_device+0x220/0x2c0 [ 1.900404] [<ffff000008595750>] __driver_attach+0xb8/0xc0 [ 1.905883] [<ffff000008593810>] bus_for_each_dev+0x68/0xa8 [ 1.911449] [<ffff000008594f00>] driver_attach+0x20/0x28 [ 1.916754] [<ffff000008594a78>] bus_add_driver+0x1a0/0x210 [ 1.922319] [<ffff0000085960a8>] driver_register+0x60/0xf8 [ 1.927798] [<ffff000008597264>] __platform_driver_register+0x44/0x50 [ 1.934236] [<ffff0000091364f4>] rpc_hf_platform_driver_init+0x18/0x20 [ 1.940759] [<ffff000008083c08>] do_one_initcall+0x38/0x118 [ 1.946328] [<ffff000009100cd4>] kernel_init_freeable+0x17c/0x210 [ 1.952417] [<ffff000008a55b04>] kernel_init+0x10/0xfc [ 1.957548] [<ffff000008084e78>] ret_from_fork+0x10/0x18 [ 1.962854] Code: f0005b82 f9454041 8b000020 14000005 (f9454041) [ 1.968952] ---[ end trace d50e3fd892ea9f0e ]--- [ 1.973587] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.973587] [ 1.982715] SMP: stopping secondary CPUs [ 1.986634] Kernel Offset: disabled [ 1.990117] CPU features: 0x1802004 [ 1.993598] Memory Limit: none [ 1.996649] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000bWe need to update the firmware (bl2)