R-Car Image created but multiple failures on bootup (no preinstall, cynara ...)

Incomplete

Description

Today, I built the demo-platform image with re-synced sources from master.

The image was build successfully but booting fails.

No pre-install, no homescreen etc. Can anyone reproduce?

 

[Error writing session log (ASCII mode) to file: putty.log

0.000189] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.19
[ 0.005751] NOTICE: BL2: PRR is R-Car M3 Ver1.0
[ 0.010334] NOTICE: BL2: Board is Starter Kit Rev1.0
[ 0.015359] NOTICE: BL2: Boot device is HyperFlash(80MHz)
[ 0.020785] NOTICE: BL2: LCM state is CM
[ 0.024827] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
[ 0.030813] NOTICE: BL2: DDR1600(rev.0.29)NOTICE: [COLD_BOOT]NOTICE: ..0
[ 0.063083] NOTICE: BL2: DRAM Split is 2ch
[ 0.066967] NOTICE: BL2: QoS is default setting(rev.0.19)
[ 0.072465] NOTICE: BL2: Lossy Decomp areas
[ 0.076644] NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
[ 0.083729] NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
[ 0.090641] NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
[ 0.097556] NOTICE: BL2: v1.4(release):3f4912a3-dirty
[ 0.102650] NOTICE: BL2: Built : 11:22:53, Apr 18 2018
[ 0.107838] NOTICE: BL2: Normal boot
[ 0.111479] NOTICE: BL2: dst=0xe6320888 src=0x8180000 len=512(0x200)
[ 0.118028] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
[ 0.124486] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
[ 0.131711] NOTICE: BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000)
[ 0.146535] NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)
U-Boot 2015.04-dirty (May 17 2018 - 00:11:44)CPU: Renesas Electronics R8A7796 rev 1.0
Board: M3ULCB
I2C: ready
DRAM: 1.9 GiB
Flash: 64 MiB
MMC: sh-sdhi: 0, sh-sdhi: 1
In: serial
Out: serial
Err: serial
Net: ravb
Hit any key to stop autoboot: 0
22120960 bytes read in 3596 ms (5.9 MiB/s)
66347 bytes read in 13 ms (4.9 MiB/s)

  1.  

    1. Flattened Device Tree blob at 48000000
      Booting using the fdt blob at 0x48000000
      Using Device Tree in place at 0000000048000000, end 000000004801332aStarting kernel ...[ 0.000000] Booting Linux on physical CPU 0x0
      [ 0.000000] Linux version 4.14.75-ltsi-yocto-standard (oe-user@oe-host) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Fri Jun 28 13:13:06 UTC 2019
      [ 0.000000] Boot CPU: AArch64 Processor [411fd073]
      [ 0.000000] Machine model: Renesas M3ULCB board based on r8a7796
      [ 0.000000] efi: Getting EFI parameters from FDT:
      [ 0.000000] efi: UEFI not found.
      [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 16 MiB
      [ 0.000000] OF: reserved mem: initialized node linux,adsp, compatible id shared-dma-pool
      [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000058000000, size 384 MiB
      [ 0.000000] OF: reserved mem: initialized node linux,cma@57000000, compatible id shared-dma-pool
      [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB
      [ 0.000000] OF: reserved mem: initialized node linux,multimedia@70000000, compatible id shared-dma-pool
      [ 0.000000] NUMA: No NUMA configuration found
      [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
      [ 0.000000] NUMA: NODE_DATA [mem 0x63ff9a080-0x63ff9bb7f]
      [ 0.000000] Zone ranges:
      [ 0.000000] DMA [mem 0x0000000048000000-0x00000000ffffffff]
      [ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff]
      [ 0.000000] Movable zone start for each node
      [ 0.000000] Early memory node ranges
      [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff]
      [ 0.000000] node 0: [mem 0x0000000057000000-0x000000007fffffff]
      [ 0.000000] node 0: [mem 0x0000000600000000-0x000000063fffffff]
      [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000063fffffff]
      [ 0.000000] psci: probing for conduit method from DT.
      [ 0.000000] psci: PSCIv1.0 detected in firmware.
      [ 0.000000] psci: Using standard PSCI v0.2 function IDs
      [ 0.000000] psci: Trusted OS resident on physical CPU 0x0
      [ 0.000000] psci: SMC Calling Convention v1.0
      [ 0.000000] percpu: Embedded 24 pages/cpu @ffff8005fff05000 s57624 r8192 d32488 u98304
      [ 0.000000] Detected PIPT I-cache on CPU0
      [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 471744
      [ 0.000000] Policy zone: Normal
      [ 0.000000] Kernel command line: console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4
      [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
      [ 0.000000] software IO TLB [mem 0x4ffff000-0x53fff000] (64MB) mapped at [ffff80000ffff000-ffff800013ffefff]
      [ 0.000000] Memory: 1123316K/1916928K available (11132K kernel code, 1250K rwdata, 7924K rodata, 1216K init, 410K bss, 121868K reserved, 671744K cma-reserved)
      [ 0.000000] Virtual kernel memory layout:
      [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
      [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
      [ 0.000000] .text : 0xffff000008080000 - 0xffff000008b60000 ( 11136 KB)
      [ 0.000000] .rodata : 0xffff000008b60000 - 0xffff000009330000 ( 8000 KB)
      [ 0.000000] .init : 0xffff000009330000 - 0xffff000009460000 ( 1216 KB)
      [ 0.000000] .data : 0xffff000009460000 - 0xffff000009598a00 ( 1251 KB)
      [ 0.000000] .bss : 0xffff000009598a00 - 0xffff0000095ff250 ( 411 KB)
      [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB)
      [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
      [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
      [ 0.000000] 0xffff7e0000200000 - 0xffff7e0018000000 ( 382 MB actual)
      [ 0.000000] memory : 0xffff800008000000 - 0xffff800600000000 ( 24448 MB)
      [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
      [ 0.000000] Preemptible hierarchical RCU implementation.
      [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
      [ 0.000000] Tasks RCU enabled.
      [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
      [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
      [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000
      [ 0.000000] GIC: Using split EOI/Deactivate mode
      [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
      [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns
      [ 0.000004] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns
      [ 0.000109] Console: colour dummy device 80x25
      [ 0.000166] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)
      [ 0.000175] pid_max: default: 32768 minimum: 301
      [ 0.000222] Security Framework initialized
      [ 0.000233] Smack: Initializing.
      [ 0.000235] Smack: IPv6 port labeling enabled.
      [ 0.001116] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
      [ 0.001570] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
      [ 0.001605] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
      [ 0.001624] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
      [ 0.015971] ASID allocator initialised with 32768 entries
      [ 0.023959] Hierarchical SRCU implementation.
      [ 0.032604] Detected Renesas R-Car Gen3 r8a7796 ES1.0
      [ 0.033628] EFI services will not be available.
      [ 0.039997] smp: Bringing up secondary CPUs ...
      [ 0.068182] Detected PIPT I-cache on CPU1
      [ 0.068229] CPU1: Booted secondary processor [411fd073]
      [ 0.096207] CPU features: enabling workaround for ARM erratum 845719
      [ 0.096216] Detected VIPT I-cache on CPU2
      [ 0.096257] CPU2: Booted secondary processor [410fd034]
      [ 0.124222] Detected VIPT I-cache on CPU3
      [ 0.124245] CPU3: Booted secondary processor [410fd034]
      [ 0.152254] Detected VIPT I-cache on CPU4
      [ 0.152276] CPU4: Booted secondary processor [410fd034]
      [ 0.180282] Detected VIPT I-cache on CPU5
      [ 0.180304] CPU5: Booted secondary processor [410fd034]
      [ 0.180374] smp: Brought up 1 node, 6 CPUs
      [ 0.180395] SMP: Total of 6 processors activated.
      [ 0.180401] CPU features: detected feature: 32-bit EL0 Support
      [ 0.180405] CPU features: detected feature: Kernel page table isolation (KPTI)
      [ 0.186428] CPU: All CPU(s) started at EL2
      [ 0.186450] alternatives: patching kernel code
      [ 0.187155] devtmpfs: initialized
      [ 0.191504] random: get_random_u32 called from bucket_table_alloc+0x104/0x268 with crng_init=0
      [ 0.191943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
      [ 0.192005] futex hash table entries: 2048 (order: 6, 262144 bytes)
      [ 0.201531] pinctrl core: initialized pinctrl subsystem
      [ 0.203164] DMI not present or invalid.
      [ 0.203523] NET: Registered protocol family 16
      [ 0.212907] cpuidle: using governor menu
      [ 0.213801] vdso: 2 pages (1 code @ ffff000008b66000, 1 data @ ffff000009465000)
      [ 0.213816] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
      [ 0.214409] DMA: preallocated 256 KiB pool for atomic allocations
      [ 0.214652] Serial: AMBA PL011 UART driver
      [ 0.218498] sh-pfc e6060000.pin-controller: r8a77960_pfc support registered
      [ 0.239384] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
      [ 0.240579] ACPI: Interpreter disabled.
      [ 0.242705] rcar-avs: use avs value: 0
      [ 0.242785] rcar-avs: /cpus/cpu@0 is running with: /opp_table0
      [ 0.242793] rcar-avs: /cpus/cpu@1 is running with: /opp_table0
      [ 0.242808] rcar-avs: /soc/gsx@fd000000 is running with: /gsx_opp_table0
      [ 0.244419] vgaarb: loaded
      [ 0.244614] SCSI subsystem initialized
      [ 0.244934] usbcore: registered new interface driver usbfs
      [ 0.244966] usbcore: registered new interface driver hub
      [ 0.245018] usbcore: registered new device driver usb
      [ 0.246169] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz
      [ 0.246526] media: Linux media interface: v0.10
      [ 0.246549] Linux video capture interface: v2.00
      [ 0.246621] pps_core: LinuxPPS API ver. 1 registered
      [ 0.246626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
      [ 0.246642] PTP clock support registered
      [ 0.246951] EDAC MC: Ver: 3.0.0
      [ 0.247126] dmi: Firmware registration failed.
      [ 0.249390] Advanced Linux Sound Architecture Driver Initialized.
      [ 0.249646] NetLabel: Initializing
      [ 0.249653] NetLabel: domain hash size = 128
      [ 0.249656] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
      [ 0.249692] NetLabel: unlabeled traffic allowed by default
      [ 0.249945] clocksource: Switched to clocksource arch_sys_counter
      [ 0.250063] VFS: Disk quotas dquot_6.6.0
      [ 0.250104] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
      [ 0.250228] pnp: PnP ACPI: disabled
      [ 0.254885] NET: Registered protocol family 2
      [ 0.255403] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
      [ 0.255473] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
      [ 0.255627] TCP: Hash tables configured (established 16384 bind 16384)
      [ 0.255758] UDP hash table entries: 1024 (order: 3, 32768 bytes)
      [ 0.255777] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
      [ 0.255903] NET: Registered protocol family 1
      [ 0.256253] RPC: Registered named UNIX socket transport module.
      [ 0.256259] RPC: Registered udp transport module.
      [ 0.256263] RPC: Registered tcp transport module.
      [ 0.256267] RPC: Registered tcp NFSv4.1 backchannel transport module.
      [ 0.257499] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
      [ 0.257799] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available
      [ 0.258227] kvm [1]: 8-bit VMID
      [ 0.259387] kvm [1]: vgic interrupt IRQ1
      [ 0.259514] kvm [1]: Hyp mode initialized successfully
      [ 0.262080] audit: initializing netlink subsys (disabled)
      [ 0.262224] audit: type=2000 audit(0.259:1): state=initialized audit_enabled=0 res=1
      [ 0.262618] workingset: timestamp_bits=44 max_order=19 bucket_order=0
      [ 0.268073] squashfs: version 4.0 (2009/01/31) Phillip Lougher
      [ 0.268636] NFS: Registering the id_resolver key type
      [ 0.268674] Key type id_resolver registered
      [ 0.268679] Key type id_legacy registered
      [ 0.268692] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
      [ 0.268870] 9p: Installing v9fs 9p2000 file system support
      [ 0.273280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
      [ 0.273298] io scheduler noop registered
      [ 0.273303] io scheduler deadline registered
      [ 0.273440] io scheduler cfq registered (default)
      [ 0.273447] io scheduler mq-deadline registered
      [ 0.273452] io scheduler kyber registered
      [ 0.279649] gpio_rcar e6050000.gpio: driving 16 GPIOs
      [ 0.279927] gpio_rcar e6051000.gpio: driving 29 GPIOs
      [ 0.280156] gpio_rcar e6052000.gpio: driving 15 GPIOs
      [ 0.280420] gpio_rcar e6053000.gpio: driving 16 GPIOs
      [ 0.280662] gpio_rcar e6054000.gpio: driving 18 GPIOs
      [ 0.280881] gpio_rcar e6055000.gpio: driving 26 GPIOs
      [ 0.281119] gpio_rcar e6055400.gpio: driving 32 GPIOs
      [ 0.281332] gpio_rcar e6055800.gpio: driving 4 GPIOs
      [ 0.285396] EINJ: ACPI disabled.
      [ 0.307245] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
      [ 0.309079] SuperH (H)SCI(F) driver initialized
      [ 0.309633] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 111, base_baud = 0) is a scif
      [ 1.327742] console [ttySC0] enabled
      [ 1.332540] msm_serial: driver initialized
      [ 1.338022] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
      [ 1.344641] [drm] No driver support for vblank timestamp query.
      [ 1.351188] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY)
      [ 1.361278] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver
      [ 1.376519] loop: module loaded
      [ 1.384204] libphy: Fixed MDIO Bus: probed
      [ 1.388495] tun: Universal TUN/TAP device driver, 1.6
      [ 1.394514] thunder-xcv, ver 1.0
      [ 1.397764] thunder-BGX, ver 1.0
      [ 1.401021] thunder-nic, ver 1.0
      [ 1.404590] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
      [ 1.410425] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
      [ 1.416372] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
      [ 1.423332] igb: Copyright (c) 2007-2014 Intel Corporation.
      [ 1.428929] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
      [ 1.436758] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
      [ 1.443015] sky2: driver version 1.30
      [ 1.447689] libphy: ravb_mii: probed
      [ 1.452064] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 2e:09:0a:01:9d:fb, IRQ 108.
      [ 1.461767] VFIO - User Level meta-driver version: 0.3
      [ 1.468106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      [ 1.474644] ehci-pci: EHCI PCI platform driver
      [ 1.479120] ehci-platform: EHCI generic platform driver
      [ 1.484727] ehci-platform ee0a0100.usb: EHCI Host Controller
      [ 1.490410] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 1
      [ 1.498402] ehci-platform ee0a0100.usb: irq 147, io mem 0xee0a0100
      [ 1.517954] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10
      [ 1.524541] hub 1-0:1.0: USB hub found
      [ 1.528316] hub 1-0:1.0: 1 port detected
      [ 1.532567] ehci-orion: EHCI orion driver
      [ 1.536819] ehci-exynos: EHCI EXYNOS driver
      [ 1.541120] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      [ 1.547320] ohci-pci: OHCI PCI platform driver
      [ 1.551829] ohci-platform: OHCI generic platform driver
      [ 1.557376] ohci-platform ee0a0000.usb: Generic Platform OHCI controller
      [ 1.564090] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 2
      [ 1.572025] ohci-platform ee0a0000.usb: irq 147, io mem 0xee0a0000
      [ 1.668289] hub 2-0:1.0: USB hub found
      [ 1.672062] hub 2-0:1.0: 1 port detected
      [ 1.676288] ohci-exynos: OHCI EXYNOS driver
      [ 1.681192] usbcore: registered new interface driver usb-storage
      [ 1.687271] usbcore: registered new interface driver usbserial
      [ 1.693126] usbcore: registered new interface driver usbserial_generic
      [ 1.699668] usbserial: USB Serial support registered for generic
      [ 1.708810] i2c /dev entries driver
      [ 1.720474] cs2000-cp 2-004f: revision - C1
      [ 1.724732] i2c-rcar e6510000.i2c: probed
      [ 1.734785] i2c-rcar e66d8000.i2c: probed
      [ 1.739430] usbcore: registered new interface driver i2c-tiny-usb
      [ 1.747873] imr fe860000.imr-lx4: IMR device (pdev: -1) registered as /dev/video0
      [ 1.755739] imr fe870000.imr-lx4: IMR device (pdev: -1) registered as /dev/video1
      [ 1.767726] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values
      [ 1.780281] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points
      [ 1.791578] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points
      [ 1.802669] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points
      [ 1.813096] sdhci: Secure Digital Host Controller Interface driver
      [ 1.819287] sdhci: Copyright(c) Pierre Ossman
      [ 1.824665] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
      [ 1.865959] usb 1-1: new high-speed USB device number 2 using ehci-platform
      [ 1.894068] renesas_sdhi_internal_dmac ee140000.sd: mmc0 base at 0xee140000 max clock rate 200 MHz
      [ 1.903195] Synopsys Designware Multimedia Card Interface Driver
      [ 1.910275] sdhci-pltfm: SDHCI platform and OF driver helper
      [ 1.917512] ledtrig-cpu: registered to indicate activity on CPUs
      [ 1.924739] usbcore: registered new interface driver usbhid
      [ 1.930364] usbhid: USB HID core driver
      [ 1.935384] optee: probing for conduit method from DT.
      [ 1.941472] optee driver R-Car Rev.1.0.9
      [ 1.945666] optee: initialized driver
      [ 1.949572] usbcore: registered new interface driver snd-usb-audio
      [ 1.961328] random: fast init done
      [ 1.969294] rcar_sound ec500000.sound: probed
      [ 1.974021] NET: Registered protocol family 17
      [ 1.978551] 9pnet: Installing 9P2000 support
      [ 1.982897] Key type dns_resolver registered
      [ 1.987648] registered taskstats version 1
      [ 1.996693] thermal emergency: set temperature to 110 celsius
      [ 2.002621] thermal emergency: shutdown target cpus 1-5
      [ 2.007917] thermal emergency: freq scaled target cpus 0
      [ 2.013576] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs
      [ 2.021840] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
      [ 2.028472] [drm] No driver support for vblank timestamp query.
      [ 2.040273] hub 1-1:1.0: USB hub found
      [ 2.044280] hub 1-1:1.0: 4 ports detected
      [ 2.054873] mmc0: new HS200 MMC card at address 0001
      [ 2.060082] mmcblk0: mmc0:0001 R1J55A 7.28 GiB
      [ 2.064700] mmcblk0boot0: mmc0:0001 R1J55A partition 1 8.00 MiB
      [ 2.070719] mmcblk0boot1: mmc0:0001 R1J55A partition 2 8.00 MiB
      [ 2.076750] mmcblk0rpmb: mmc0:0001 R1J55A partition 3 4.00 MiB, chardev (237:0)
      [ 2.205829] Console: switching to colour frame buffer device 240x67
      [ 2.228585] rcar-du feb00000.display: fb0: frame buffer device
      [ 2.234881] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0
      [ 2.242629] [drm] Device feb00000.display probed
      [ 2.248303] bd9571mwv 7-0030: Device: BD9571MWV rev. 1
      [ 2.259704] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
      [ 2.326201] renesas_sdhi_internal_dmac ee100000.sd: mmc1 base at 0xee100000 max clock rate 200 MHz
      [ 2.337076] asoc-audio-graph-card sound: ak4613-hifi <-> ec500000.sound mapping ok
      [ 2.344668] asoc-audio-graph-card sound: ASoC: no DMI vendor name!
      [ 2.345957] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
      [ 2.361085] input: keyboard as /devices/platform/keyboard/input/input0
      [ 2.367916] hctosys: unable to open rtc device (rtc0)
      [ 2.373394] ALSA device list:
      [ 2.376366] #0: ak4613
      [ 2.379442] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
      [ 2.387156] Waiting for root device /dev/mmcblk1p1...
      [ 2.476108] hub 1-1.4:1.0: USB hub found
      [ 2.480289] hub 1-1.4:1.0: 4 ports detected
      [ 2.560348] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
      [ 2.567245] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
      [ 2.576994] mmcblk1: p1
      [ 2.594418] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
      [ 2.602575] VFS: Mounted root (ext4 filesystem) readonly on device 179:97.
      [ 2.613917] devtmpfs: mounted
      [ 2.617391] Freeing unused kernel memory: 1216K
      [ 2.769972] usb 1-1.4.4: new full-speed USB device number 4 using ehci-platform
      [ 2.881142] systemd[1]: Successfully loaded Smack policies.
      [ 2.887499] systemd[1]: Successfully loaded Smack/CIPSO policies.
      [ 2.895278] systemd[1]: System time before build time, advancing clock.
      [ 2.907393] input: ILITEK Multi-Touch-V3004 as /devices/platform/soc/ee0a0100.usb/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:222A:0088.0001/input/input1
      [ 2.920940] hid-multitouch 0003:222A:0088.0001: input: USB HID v1.10 Device [ILITEK Multi-Touch-V3004] on usb-ee0a0100.usb-1.4.4/input0
      [ 2.945434] hid-generic 0003:222A:0088.0002: device has no listeners, quitting
      [ 2.961820] NET: Registered protocol family 10
      [ 2.966999] Segment Routing with IPv6
      [ 2.977174] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 4.179ms.
      [ 3.013136] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
      [ 3.034823] systemd[1]: Detected architecture arm64.Welcome to Automotive Grade Linux 7.99.2 (halibut)![ 3.073437] systemd[1]: Set hostname to <m3ulcb>.
      [ 3.086220] random: systemd: uninitialized urandom read (16 bytes read)
      [ 3.092889] systemd[1]: Initializing machine ID from random generator.
      [ 3.099544] systemd[1]: Installed transient /etc/machine-id file.
      [ 3.258536] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
      [ 3.275623] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
      [ 3.302006] systemd[1]: Configuration file /lib/systemd/system/systemd-udevd.service.d/udev-shared.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
      [ 3.500876] random: systemd: uninitialized urandom read (16 bytes read)
      [ 3.510630] systemd[1]: Created slice system-serial\x2dgetty.slice.
      [ OK ] Created slice system-serial\x2dgetty.slice.
      [ 3.530076] random: systemd: uninitialized urandom read (16 bytes read)
      [ 3.536744] systemd[1]: Reached target Swap.
      [ OK ] Reached target Swap.
      [ OK ] Started Forward Password Requests to Wall Directory Watch.
      [ OK ] Created slice system-afm\x2duser\x2dsession.slice.
      [ OK ] Listening on Journal Audit Socket.
      [ OK ] Started Dispatch Password Requests to Console Directory Watch.
      [ OK ] Listening on udev Kernel Socket.
      [ OK ] Listening on Journal Socket.
      Mounting Temporary Directory (/tmp)...
      Mounting Kernel Debug File System...
      Starting Create list of required stâ¦ce nodes for the current kernel...
      [ OK ] Listening on Network Service Netlink Socket.
      [ OK ] Reached target Remote File Systems.
      Starting Setup V[ 3.734274] systemd[1887]: systemd-vconsole-setup.service: Failed to execute command: Permission denied
      irtual Console...
      Mounting Huge Pages File System...
      Mounting POSIX Message Queue File System...
      [ OK ] Reached target Host and Network Name Lookups.
      [ OK ] Listening on udev Control Socket.
      Starting udev Coldplug all Devices...
      [ OK ] Listening on Process Core Dump Socket.
      [ OK ] Reached target Paths.
      [ OK ] Created slice User and Session Slice.
      [ OK ] Reached target Slices.
      [ OK ] Started Hardware RNG Entropy Gatherer Daemon.
      [ OK ] Created slice system-getty.slice.
      [ OK ] Listening on initctl Compatibility Named Pipe.
      Starting Load Kernel Modules...
      Starting File S[ 3.988674] systemd[2582]: systemd-fsck-root.service: Failed to execute command: Permission denied
      ystem Check on Root Devi[ 3.992653] mostcore: loading out-of-tree module taints kernel.
      ce...
      [ 3.993202] mostcore: init()
      [ 3.996199] aim_cdev: init()
      [ 3.996247] mostcore: registered new application interfacing module cdev
      [ 3.998996] mostcore: registered new application interfacing module networking
      [ 4.002248] aim_sound: init()
      [ 4.002278] mostcore: registered new application interfacing module sound
      [ 4.006179] mostcore: registered new application interfacing module v4l
      [ 4.017171] usbcore: registered new interface driver hdm_usb
      [ 4.021630] rgnmm_drv mmngr: assigned reserved memory node linux,multimedia@70000000
      [ OK ] Listening on Journal Socket (/dev/log).
      Starting Journal Service...
      [ OK ] Mounted Temporary Directory (/tmp).
      [ OK ] Mounted Kernel Debug File System.
      [ OK ] Started Create list of required staâ¦vice nodes for the current kernel.
      [ OK ] Started Journal Service.
      [FAILED] Failed to start Setup Virtual Console.
      See 'systemctl status systemd-vconsole-setup.service' for details.
      [ 4.187726] PVR_K: 2163: HTBInit: HTBufferSizeInKB = 64
      [ 4.196645] PVR_K: 2163: RGX Device initialised with BVNC 4.45.2.58
      [ 4.203273] pvrsrvkm fd000000.gsx: opp[1/4]: (200000000 Hz, 830000 uV)
      [ 4.209829] pvrsrvkm fd000000.gsx: opp[2/4]: (300000000 Hz, 830000 uV)
      [ 4.209834] pvrsrvkm fd000000.gsx: opp[3/4]: (400000000 Hz, 830000 uV)
      [ 4.209837] pvrsrvkm fd000000.gsx: opp[4/4]: (600000000 Hz, 830000 uV)
      [ 4.210387] [drm] Initialized pvr 1.10.5187610 20170530 for fd000000.gsx on minor 1
      [ 4.224913] sllin: serial line LIN interface driver
      [ OK ] Mounted Huge Pages File System.
      [ OK ] Mounted POSIX Message Queue File System.
      [ OK ] Started Load Kernel Modules.
      [FAILED] Failed to start File System Check on Root Device.
      See 'systemctl status systemd-fsck-root.service' for details.
      Starting Remount Root and Kernel File Systems...
      Mounting Kernel Configuration File System...
      Starting Apply Kernel Variables...
      [FAILED] Failed to start Remount Root and Kernel File Systems.
      See 'systemctl status systemd-remount-fs.service' for details.
      [ OK ] Mounted Kernel Configuration File System.
      [FAILED] Failed to start Apply Kernel Variables.
      See 'systemctl status systemd-sysctl.service' for details.
      [ OK ] Started udev Coldplug all Devices.
      Starting Create Static Device Nodes in /dev...
      Starting Flush Journal to Persistent Storage...
      [ 4.528450] systemd-journald[2605]: Received request to flush runtime journal from PID 1
      [ OK ] Started Create Static Device Nodes in /dev.
      [ OK ] Started Flush Journal to Persistent Storage.
      Starting udev Kernel Device Manager...
      [ OK ] Reached target Local File Systems (Pre).
      Mounting /var/volatile...
      [ OK ] Reached target Containers.
      [ OK ] Mounted /var/volatile.
      Starting Bind mount volatile /var/cache...
      Starting Bind mount volatile /var/lib...
      Starting Bind mount volatile /var/spool...
      [ OK ] Started Bind mount volatile /var/cache.
      [ OK ] Started udev Kernel Device Manager.
      [ OK ] Started Bind mount volatile /var/lib.
      [ OK ] Started Bind mount volatile /var/spool.
      Starting Load/Save Random Seed...
      Starting Start Psplash Boot Screen...
      [ OK ] Reached target Local File Systems.
      Starting Create Volatile Files and Directories...
      [FAILED] Failed to start Load/Save Random Seed.
      See 'systemctl status systemd-random-seed.service' for details.
      [ OK ] Started Start Psplash Boot Screen.
      [ OK ] Started Create Volatile Files and Directories.
      [ 5.205734] random: crng init done
      [ 5.209144] random: 7 urandom warning(s) missed due to ratelimiting
      [ OK ] Found device /dev/ttySC0.
      Starting Update UTMP about System Boot/Shutdown...
      Starting Run pending postinsts...
      [ 5.969526] run-postinsts[3355]: Configuring packages on first boot....
      Starting Apply Kernel Variables...
      [ 5.996444] run-postinsts[3355]: (This may take several minutes. Please do not power off the machine.)
      Starting Load/Save Random Seed...
      [ 6.028542] run-postinsts[3355]: Running postinst /etc/rpm-postinsts/100-cynara...
      [FAILED] Failed to start Apply Kernel Variables.
      See 'systemctl status systemd-sysctl.service' for details.
      [FAILED] Failed to start Load/Save Random Seed.
      See 'systemctl status systemd-random-seed.service' for details.
      Starting Network Service...
      [ OK ] Started Update UTMP about System Boot/Shutdown.
      [ OK ] Started Network Service.
      [ 7.546501] run-postinsts[3355]: rm: cannot remove '/etc/rpm-postinsts/100-cynara': Read-only file system
      [ 7.568892] run-postinsts[3355]: Running postinst /etc/rpm-postinsts/101-security-manager-policy...
      [ 7.623712] run-postinsts[3355]: rm: cannot remove '/etc/rpm-postinsts/101-security-manager-policy': Read-only file system
      [ 7.644524] run-postinsts[3355]: Running postinst /etc/rpm-postinsts/102-af-main...
      [ 7.664485] run-postinsts[3355]: rm: cannot remove '/etc/rpm-postinsts/102-af-main': Read-only file system
      [ 7.684521] run-postinsts[3355]: rm: cannot remove '/etc/rpm-postinsts/102-af-main': Read-only file system
      [FAILED] Failed to start Run pending postinsts.
      See 'systemctl status run-postinsts.service' for details.
      [ 7.704426] run-postinsts[3355]: rm: cannot remove '/etc/rpm-postinsts/100-cynara': Read-only file system
      [ OK ] Reached target System Initialization.
      [ 7.756336] run-postinsts[3355]: rm: cannot remove '/etc/rpm-postinsts/101-security-manager-policy': Read-only file system
      [ OK ] Started Daily Cleanup of Temporary Directories.
      [ OK ] [ 7.792565] Reached target Timers.run-postinsts
      [3355]: Removing any system startup links for run-postinsts ...
      [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
      [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
      [ OK ] Listening on afm-system-daemon.socket.
      [ OK ] Listening on cynara-admin.socket.
      Starting cynara-agent.socket.
      Starting sshd.socket.
      [ OK ] Listening on security-manager.socket.
      [ OK ] Listening on cynara.socket.
      [ OK ] Listening on D-Bus System Message Bus Socket.
      [ OK ] Listening on cynara-agent.socket.
      [ OK ] Listening on sshd.socket.
      [ OK ] Reached target Sockets.
      [ OK ] Reached target Basic System.
      Starting Save/Restore Sound Card State...
      Starting Avahi mDNS/DNS-SD Stack...
      Starting User Mode Init Manager for TI shared transport...
      Starting Driver configuration for Unicens2...
      Starting Install Security Manager database...
      Starting neard service...
      Starting PowerVR consumer services...
      Starting Disk Ma[ 8.174632] Bluetooth: Core ver 2.22
      nager (legacy ve[ 8.179853] NET: Registered protocol family 31
      rsion)...
      [ 8.185508] Bluetooth: HCI device and connection manager initialized
      [ 8.192782] Bluetooth: HCI socket layer initialized
      [ 8.197712] Bluetooth: L2CAP socket layer initialized
      [ 8.202831] Bluetooth: SCO socket layer initialized
      Starting Terminate Psplash Boot Screen...
      Starting Telephony service...
      Starting Initiate afm-system-setup...
      Starting Login Service...
      [ OK ] Started D-Bus System Message Bus.
      Starting Connection service...
      [ OK ] Reached target cynara sockets.
      [ OK ] Started Save/Restore Sound Card State.
      [ OK ] Started User Mode Init Manager for TI shared transport.
      [FAILED] Failed to start Driver configuration for Unicens2.
      See 'systemctl status unicens-config.service' for details.
      [ OK ] Started Install Security Manager database.
      [ OK ] Started PowerVR consumer services.
      [ OK ] Started Terminate Psplash Boot Screen.
      [ OK ] Started Initiate afm-system-setup.
      Starting cynara-monitor-get.socket.
      [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
      [ OK ] Started Application Framework Supervisor.
      [ OK ] Started Application Framework Master, system side.
      Starting LIN DEMO startup...
      Starting Start the security manager...
      [ OK ] Reached target Sound

Environment

m3ulcb

Activity

Show:

Tobias Jahnke 
July 9, 2019 at 8:12 AM

Environment issue - no fix required

Tobias Jahnke 
July 9, 2019 at 8:09 AM

Ok. Issue disappeared after rebooting host system and reconnecting card reader. Thanks for your help.

Jan-Simon Moeller 
July 8, 2019 at 1:15 PM

 

TLDR:

we fail to remount "/" as rw . This leads to all other issues.

Jan-Simon Moeller 
July 8, 2019 at 1:11 PM

cache should not be an issue ...given the message above.

 

Tobias Jahnke 
July 8, 2019 at 1:07 PM

I checked 2 different SD cards. However I can clear my workspace and rebuild to exclude any caching issues.

Details

Assignee

Reporter

Hardware Platform(s) Affected

Renesas M3

Components

Affects versions

Priority

Created July 8, 2019 at 11:35 AM
Updated July 9, 2019 at 3:23 PM
Resolved July 9, 2019 at 8:12 AM