-------------------------------------------------- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073] [ 0.000000] Linux version 5.10.41-yocto-standard (oe-user@oe-host) (aarch64-agl-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Jan 30 17:33:20 UTC 2023 [ 0.000000] Machine model: Renesas H3ULCB Kingfisher board based on r8a77951 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 400 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma@57000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,multimedia@70000000, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000048000000-0x000000077fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x77efbdb00-0x77efbffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000048000000-0x000000007fffffff] [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000077fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff] [ 0.000000] node 0: [mem 0x0000000054000000-0x0000000056ffffff] [ 0.000000] node 0: [mem 0x0000000057000000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x0000000500000000-0x000000057fffffff] [ 0.000000] node 0: [mem 0x0000000600000000-0x000000067fffffff] [ 0.000000] node 0: [mem 0x0000000700000000-0x000000077fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000077fffffff] [ 0.000000] On node 0 totalpages: 2064384 [ 0.000000] DMA zone: 3584 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 229376 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 4096 pages used for memmap [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS resident on physical CPU 0x0 [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s93272 r8192 d29608 u131072 [ 0.000000] pcpu-alloc: s93272 r8192 d29608 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2032128 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait rw [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000050000000-0x0000000054000000] (64MB) [ 0.000000] Memory: 7280244K/8257536K available (15744K kernel code, 2218K rwdata, 6688K rodata, 3968K init, 536K bss, 305548K reserved, 671744K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x384/0x548 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns [ 0.000165] Console: colour dummy device 80x25 [ 0.000247] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333) [ 0.000258] pid_max: default: 32768 minimum: 301 [ 0.000318] LSM: Security Framework initializing [ 0.000344] SELinux: Initializing. [ 0.000389] LSM support for eBPF active [ 0.000461] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000506] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002049] rcu: Hierarchical SRCU implementation. [ 0.003285] Detected Renesas R-Car Gen3 r8a7795 ES3.0 [ 0.004346] EFI services will not be available. [ 0.004677] smp: Bringing up secondary CPUs ... [ 0.005146] Detected PIPT I-cache on CPU1 [ 0.005197] CPU1: Booted secondary processor 0x0000000001 [0x411fd073] [ 0.005686] Detected PIPT I-cache on CPU2 [ 0.005711] CPU2: Booted secondary processor 0x0000000002 [0x411fd073] [ 0.006148] Detected PIPT I-cache on CPU3 [ 0.006171] CPU3: Booted secondary processor 0x0000000003 [0x411fd073] [ 0.006603] CPU features: detected: ARM erratum 845719 [ 0.006616] Detected VIPT I-cache on CPU4 [ 0.006664] CPU4: Booted secondary processor 0x0000000100 [0x410fd034] [ 0.007121] Detected VIPT I-cache on CPU5 [ 0.007149] CPU5: Booted secondary processor 0x0000000101 [0x410fd034] [ 0.007598] Detected VIPT I-cache on CPU6 [ 0.007625] CPU6: Booted secondary processor 0x0000000102 [0x410fd034] [ 0.008085] Detected VIPT I-cache on CPU7 [ 0.008113] CPU7: Booted secondary processor 0x0000000103 [0x410fd034] [ 0.008195] smp: Brought up 1 node, 8 CPUs [ 0.008222] SMP: Total of 8 processors activated. [ 0.008227] CPU features: detected: 32-bit EL0 Support [ 0.008233] CPU features: detected: CRC32 instructions [ 0.008238] CPU features: detected: 32-bit EL1 Support [ 0.021203] CPU: All CPU(s) started at EL2 [ 0.021244] alternatives: patching kernel code [ 0.022468] devtmpfs: initialized [ 0.031539] KASLR disabled due to lack of seed [ 0.031689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.031703] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.040348] pinctrl core: initialized pinctrl subsystem [ 0.040863] DMI not present or invalid. [ 0.041196] NET: Registered protocol family 16 [ 0.042108] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.042282] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.042567] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.042606] audit: initializing netlink subsys (disabled) [ 0.042790] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.043120] thermal_sys: Registered thermal governor 'power_allocator' [ 0.044049] cpuidle: using governor menu [ 0.044161] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.044283] ASID allocator initialised with 65536 entries [ 0.044462] Serial: AMBA PL011 UART driver [ 0.078199] sh-pfc e6060000.pinctrl: r8a77951_pfc support registered [ 0.086951] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.086959] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.086965] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.086970] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.087896] cryptd: max_cpu_qlen set to 1000 [ 0.089852] ACPI: Interpreter disabled. [ 0.092736] rcar-avs: use avs value: 0 [ 0.092752] rcar-avs: cpu@0 is running with: opp_table0 [ 0.092760] rcar-avs: cpu@1 is running with: opp_table0 [ 0.092767] rcar-avs: cpu@2 is running with: opp_table0 [ 0.092774] rcar-avs: cpu@3 is running with: opp_table0 [ 0.092874] rcar-avs: gsx@fd000000 is running with: gsx_opp_table0 [ 0.094227] iommu: Default domain type: Translated [ 0.094930] ipmmu-vmsa e67b0000.iommu: IPMMU context 0 is reserved [ 0.095819] vgaarb: loaded [ 0.096029] SCSI subsystem initialized [ 0.096154] libata version 3.00 loaded. [ 0.096287] usbcore: registered new interface driver usbfs [ 0.096310] usbcore: registered new interface driver hub [ 0.096333] usbcore: registered new device driver usb [ 0.098630] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz [ 0.099151] mc: Linux media interface: v0.10 [ 0.099171] videodev: Linux video capture interface: v2.00 [ 0.099217] pps_core: LinuxPPS API ver. 1 registered [ 0.099221] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.099229] PTP clock support registered [ 0.099375] EDAC MC: Ver: 3.0.0 [ 0.100322] FPGA manager framework [ 0.100370] Advanced Linux Sound Architecture Driver Initialized. [ 0.100889] clocksource: Switched to clocksource arch_sys_counter [ 0.543276] VFS: Disk quotas dquot_6.6.0 [ 0.543324] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.543481] pnp: PnP ACPI: disabled [ 0.547557] NET: Registered protocol family 2 [ 0.547942] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.550187] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.550275] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.550554] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.551137] TCP: Hash tables configured (established 65536 bind 65536) [ 0.551273] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.551382] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.551605] NET: Registered protocol family 1 [ 0.551982] RPC: Registered named UNIX socket transport module. [ 0.551989] RPC: Registered udp transport module. [ 0.551993] RPC: Registered tcp transport module. [ 0.551996] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.552006] PCI: CLS 0 bytes, default 64 [ 0.552984] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.553262] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available [ 0.553910] kvm [1]: IPA Size Limit: 40 bits [ 0.554610] kvm [1]: vgic interrupt IRQ9 [ 0.554784] kvm [1]: Hyp mode initialized successfully [ 0.557894] Initialise system trusted keyrings [ 0.558010] workingset: timestamp_bits=42 max_order=21 bucket_order=0 [ 0.561424] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.561832] NFS: Registering the id_resolver key type [ 0.561855] Key type id_resolver registered [ 0.561860] Key type id_legacy registered [ 0.561914] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.561919] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.562074] 9p: Installing v9fs 9p2000 file system support [ 0.588094] NET: Registered protocol family 38 [ 0.588104] Key type asymmetric registered [ 0.588109] Asymmetric key parser 'x509' registered [ 0.588138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.588144] io scheduler mq-deadline registered [ 0.588149] io scheduler kyber registered [ 0.592952] gpio_rcar e6050000.gpio: driving 16 GPIOs [ 0.593265] gpio_rcar e6051000.gpio: driving 29 GPIOs [ 0.593438] gpio-455 (BL PWM 100%): hogged as output/high [ 0.593557] gpio_rcar e6052000.gpio: driving 15 GPIOs [ 0.593830] gpio_rcar e6053000.gpio: driving 16 GPIOs [ 0.593990] gpio-432 (MOST RST): hogged as output/high [ 0.594116] gpio_rcar e6054000.gpio: driving 18 GPIOs [ 0.594385] gpio_rcar e6055000.gpio: driving 26 GPIOs [ 0.594545] gpio-381 (Onboard MCh Audio): hogged as output/high [ 0.594665] gpio_rcar e6055400.gpio: driving 32 GPIOs [ 0.594925] gpio_rcar e6055800.gpio: driving 4 GPIOs [ 0.596127] rcar-pcie fe000000.pcie: host bridge /soc/pcie@fe000000 ranges: [ 0.596149] rcar-pcie fe000000.pcie: IO 0x00fe100000..0x00fe1fffff -> 0x0000000000 [ 0.596168] rcar-pcie fe000000.pcie: MEM 0x00fe200000..0x00fe3fffff -> 0x00fe200000 [ 0.596182] rcar-pcie fe000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000 [ 0.596197] rcar-pcie fe000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000 [ 0.596212] rcar-pcie fe000000.pcie: IB MEM 0x0040000000..0x007fffffff -> 0x0040000000 [ 0.596252] rcar-pcie fe000000.pcie: no pcie3v3 regulator found [ 0.596260] rcar-pcie fe000000.pcie: no pcie1v8 regulator found [ 0.660525] rcar-pcie fe000000.pcie: PCIe link down [ 0.660684] rcar-pcie ee800000.pcie: host bridge /soc/pcie@ee800000 ranges: [ 0.660702] rcar-pcie ee800000.pcie: IO 0x00ee900000..0x00ee9fffff -> 0x0000000000 [ 0.660717] rcar-pcie ee800000.pcie: MEM 0x00eea00000..0x00eebfffff -> 0x00eea00000 [ 0.660731] rcar-pcie ee800000.pcie: MEM 0x00c0000000..0x00c7ffffff -> 0x00c0000000 [ 0.660740] rcar-pcie ee800000.pcie: MEM 0x00c8000000..0x00cfffffff -> 0x00c8000000 [ 0.660752] rcar-pcie ee800000.pcie: IB MEM 0x0040000000..0x007fffffff -> 0x0040000000 [ 0.662276] EINJ: ACPI disabled. [ 0.682088] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.683437] SuperH (H)SCI(F) driver initialized [ 0.683778] e6540000.serial: ttySC1 at MMIO 0xe6540000 (irq = 42, base_baud = 0) is a hscif [ 0.683942] serial serial0: tty port ttySC1 registered [ 0.684413] e6550000.serial: ttySC3 at MMIO 0xe6550000 (irq = 43, base_baud = 0) is a hscif [ 0.685019] e6e68000.serial: ttySC2 at MMIO 0xe6e68000 (irq = 130, base_baud = 0) is a scif [ 0.685535] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 131, base_baud = 0) is a scif [ 1.920315] printk: console [ttySC0] enabled [ 1.930346] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY) [ 1.940249] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.956221] loop: module loaded [ 1.960149] megasas: 07.714.04.00-rc1 [ 1.967372] libphy: Fixed MDIO Bus: probed [ 1.972127] tun: Universal TUN/TAP device driver, 1.6 [ 1.977739] thunder_xcv, ver 1.0 [ 1.980991] thunder_bgx, ver 1.0 [ 1.984229] nicpf, ver 1.0 [ 1.987423] hclge is initializing [ 1.990753] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.997972] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.003310] e1000: Intel(R) PRO/1000 Network Driver [ 2.008187] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.013950] e1000e: Intel(R) PRO/1000 Network Driver [ 2.018912] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.024855] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.030253] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.035837] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 2.042101] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.048032] sky2: driver version 1.30 [ 2.052990] libphy: ravb_mii: probed [ 2.059353] ravb e6800000.ethernet eth0: Base address at 0xe6800000, e6:80:33:5a:50:01, IRQ 125. [ 2.068956] VFIO - User Level meta-driver version: 0.3 [ 2.075265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.081815] ehci-pci: EHCI PCI platform driver [ 2.086279] ehci-platform: EHCI generic platform driver [ 2.116950] ehci-platform ee080100.usb: EHCI Host Controller [ 2.122627] ehci-platform ee080100.usb: new USB bus registered, assigned bus number 1 [ 2.130526] ehci-platform ee080100.usb: irq 174, io mem 0xee080100 [ 2.148895] ehci-platform ee080100.usb: USB 2.0 started, EHCI 1.10 [ 2.155432] hub 1-0:1.0: USB hub found [ 2.159201] hub 1-0:1.0: 1 port detected [ 2.163562] ehci-platform ee0a0100.usb: EHCI Host Controller [ 2.169247] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 2 [ 2.177143] ehci-platform ee0a0100.usb: irq 175, io mem 0xee0a0100 [ 2.196894] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10 [ 2.203359] hub 2-0:1.0: USB hub found [ 2.207125] hub 2-0:1.0: 1 port detected [ 2.211444] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.217661] ohci-pci: OHCI PCI platform driver [ 2.222145] ohci-platform: OHCI generic platform driver [ 2.227608] ohci-platform ee080000.usb: Generic Platform OHCI controller [ 2.234323] ohci-platform ee080000.usb: new USB bus registered, assigned bus number 3 [ 2.242201] ohci-platform ee080000.usb: irq 174, io mem 0xee080000 [ 2.335255] hub 3-0:1.0: USB hub found [ 2.339023] hub 3-0:1.0: 1 port detected [ 2.343308] ohci-platform ee0a0000.usb: Generic Platform OHCI controller [ 2.350035] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 4 [ 2.357922] ohci-platform ee0a0000.usb: irq 175, io mem 0xee0a0000 [ 2.451265] hub 4-0:1.0: USB hub found [ 2.455031] hub 4-0:1.0: 1 port detected [ 2.459670] xhci-hcd ee000000.usb: xHCI Host Controller [ 2.464926] xhci-hcd ee000000.usb: new USB bus registered, assigned bus number 5 [ 2.488194] xhci-hcd ee000000.usb: hcc params 0x014051ce hci version 0x100 quirks 0x0000000000830410 [ 2.497349] xhci-hcd ee000000.usb: irq 173, io mem 0xee000000 [ 2.503524] hub 5-0:1.0: USB hub found [ 2.507293] hub 5-0:1.0: 1 port detected [ 2.511372] xhci-hcd ee000000.usb: xHCI Host Controller [ 2.516605] xhci-hcd ee000000.usb: new USB bus registered, assigned bus number 6 [ 2.524005] xhci-hcd ee000000.usb: Host supports USB 3.0 SuperSpeed [ 2.530316] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.538681] hub 6-0:1.0: USB hub found [ 2.542455] hub 6-0:1.0: 1 port detected [ 2.546986] usbcore: registered new interface driver usb-storage [ 2.553076] usbcore: registered new interface driver usbserial_generic [ 2.559617] usbserial: USB Serial support registered for generic [ 2.565656] usbcore: registered new interface driver cp210x [ 2.571416] usbserial: USB Serial support registered for cp210x [ 2.578817] renesas_usbhs e6590000.usb: host probed [ 2.583708] renesas_usbhs e6590000.usb: no transceiver found [ 2.589432] renesas_usbhs e6590000.usb: gadget probed [ 2.594641] renesas_usbhs e6590000.usb: probed [ 2.600290] i2c /dev entries driver [ 2.613791] cs2000-cp 2-004f: revision - C1 [ 2.618943] pca953x 2-0074: supply vcc not found, using dummy regulator [ 2.625635] pca953x 2-0074: using no AI [ 2.628902] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 2.638301] gpio-340 (Audio_Out_OFF): hogged as output/high [ 2.644559] gpio-346 (HUB pwen): hogged as output/high [ 2.650382] gpio-347 (HUB rst): hogged as output/high [ 2.656991] gpio-349 (OTG EXTLPn): hogged as output/high [ 2.662983] gpio-348 (OTG OFFVBUSn): hogged as output/low [ 2.669063] gpio-355 (SND_RST): hogged as output/high [ 2.674784] pca953x 2-0075: supply vcc not found, using dummy regulator [ 2.681467] pca953x 2-0075: using no AI [ 2.688437] gpio-330 (GPS rst): hogged as output/high [ 2.694611] gpio-333 (FPDLink shdn): hogged as output/high [ 2.700305] i2c-rcar e6510000.i2c: probed [ 2.707350] random: fast init done [ 2.715263] pca953x 4-0076: supply vcc not found, using dummy regulator [ 2.721957] pca953x 4-0076: using no AI [ 2.727029] gpio-308 (Video-B A0): hogged as output/low [ 2.732515] gpio-309 (Video-B A1): hogged as output/high [ 2.738083] gpio-310 (Video-A A0): hogged as output/low [ 2.743565] gpio-311 (Video-A A1): hogged as output/high [ 2.749288] gpio-318 (RaspB_IO1): hogged as output/high [ 2.754771] gpio-319 (RaspB_IO0): hogged as output/high [ 2.760253] gpio-312 (SAM RST): hogged as output/high [ 2.765561] gpio-313 (SAM PWR): hogged as output/low [ 2.770781] gpio-322 (LVDS switch): hogged as output/high [ 2.776533] pca953x 4-0077: supply vcc not found, using dummy regulator [ 2.783245] pca953x 4-0077: using no AI [ 2.787811] gpio-292 (mPCIe WAKE#): hogged as output/low [ 2.793393] gpio-293 (mPCIe W_DISABLE): hogged as output/high [ 2.799273] gpio-294 (mPCIe CLKREQ#): hogged as input [ 2.804459] gpio-295 (mPCIe OVC): hogged as input [ 2.807553] hub 2-1:1.0: USB hub found [ 2.813161] i2c-rcar e66d8000.i2c: probed [ 2.815161] hub 2-1:1.0: 4 ports detected [ 2.817985] usbcore: registered new interface driver i2c-tiny-usb [ 2.828004] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.832964] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.837981] i2c i2c-2: Added multiplexed i2c bus 11 [ 2.843009] i2c i2c-2: Added multiplexed i2c bus 12 [ 2.848196] adv7511 13-003d: supply avdd not found, using dummy regulator [ 2.855066] adv7511 13-003d: supply dvdd not found, using dummy regulator [ 2.861887] adv7511 13-003d: supply pvdd not found, using dummy regulator [ 2.868724] adv7511 13-003d: supply bgvdd not found, using dummy regulator [ 2.875629] adv7511 13-003d: supply dvdd-3v not found, using dummy regulator [ 2.906110] i2c i2c-2: Added multiplexed i2c bus 13 [ 2.911146] i2c i2c-2: Added multiplexed i2c bus 14 [ 2.916304] i2c i2c-2: Added multiplexed i2c bus 15 [ 2.916501] edt_ft5x06 15-0038: supply vcc not found, using dummy regulator [ 2.921680] i2c i2c-2: Added multiplexed i2c bus 16 [ 2.929003] edt_ft5x06 15-0038: touchscreen probe failed [ 2.933038] pca954x 2-0071: registered 8 multiplexed busses for I2C switch pca9548 [ 2.946389] i2c i2c-4: Added multiplexed i2c bus 17 [ 2.951716] i2c i2c-4: Added multiplexed i2c bus 18 [ 2.956711] i2c i2c-4: Added multiplexed i2c bus 19 [ 2.961732] i2c i2c-4: Added multiplexed i2c bus 20 [ 2.966929] i2c i2c-4: Added multiplexed i2c bus 21 [ 2.972161] i2c i2c-4: Added multiplexed i2c bus 22 [ 2.977152] i2c i2c-4: Added multiplexed i2c bus 23 [ 2.982623] dummy 24-006c: failed reading [ 2.986713] i2c i2c-4: Added multiplexed i2c bus 24 [ 2.991596] pca954x 4-0071: registered 8 multiplexed busses for I2C switch pca9548 [ 3.108903] usb 2-1.1: new high-speed USB device number 3 using ehci-platform [ 3.153279] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 3.182741] hub 6-1:1.0: USB hub found [ 3.186803] hub 6-1:1.0: 4 ports detected [ 3.207401] ov5642 22-003c: reg_write: i2c write error, reg: 3103 [ 3.218420] rcar-csi2 fea80000.csi2: 2 lanes found [ 3.223499] rcar-csi2 feaa0000.csi2: 4 lanes found [ 3.232725] rcar-vin e6ef0000.video: Device registered as video0 [ 3.238819] rcar-vin e6ef1000.video: Device registered as video1 [ 3.239686] hub 2-1.1:1.0: USB hub found [ 3.244906] rcar-vin e6ef2000.video: Device registered as video2 [ 3.254782] hub 2-1.1:1.0: 4 ports detected [ 3.254846] rcar-vin e6ef3000.video: Device registered as video3 [ 3.265054] rcar-vin e6ef4000.video: Device registered as video4 [ 3.271136] rcar-vin e6ef5000.video: Device registered as video5 [ 3.279126] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values [ 3.290963] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points [ 3.302349] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points [ 3.313569] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points [ 3.322856] sdhci: Secure Digital Host Controller Interface driver [ 3.329071] sdhci: Copyright(c) Pierre Ossman [ 3.332904] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 3.334007] Synopsys Designware Multimedia Card Interface Driver [ 3.334561] renesas_sdhi_internal_dmac ee140000.mmc: Adding to iommu group 0 [ 3.334585] renesas_sdhi_internal_dmac ee100000.mmc: Got CD GPIO [ 3.334587] renesas_sdhi_internal_dmac ee140000.mmc: Using IPMMU context 1 [ 3.340917] usb 2-1.3: new high-speed USB device number 4 using ehci-platform [ 3.346681] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.380353] ledtrig-cpu: registered to indicate activity on CPUs [ 3.386579] renesas_sdhi_internal_dmac ee140000.mmc: mmc0 base at 0x00000000ee140000, max clock rate 200 MHz [ 3.386622] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 3.403221] usbcore: registered new interface driver usbhid [ 3.408793] usbhid: USB HID core driver [ 3.413621] optee: probing for conduit method. [ 3.418083] optee: revision 3.13 (93483d65) [ 3.418665] optee driver R-Car Rev.1.0.11 [ 3.427308] optee: initialized driver [ 3.432488] usbcore: registered new interface driver snd-usb-audio [ 3.449477] rcar_sound ec500000.sound: probed [ 3.454409] NET: Registered protocol family 17 [ 3.458979] 9pnet: Installing 9P2000 support [ 3.463341] Key type dns_resolver registered [ 3.467962] registered taskstats version 1 [ 3.472073] Loading compiled-in X.509 certificates [ 3.473127] mmc0: new HS400 MMC card at address 0001 [ 3.482802] mmcblk0: mmc0:0001 DJUD4R 119 GiB [ 3.487661] mmcblk0boot0: mmc0:0001 DJUD4R partition 1 31.9 MiB [ 3.488732] thermal emergency: set temperature to 110 celsius [ 3.490889] hub 5-1:1.0: USB hub found [ 3.491178] hub 5-1:1.0: 4 ports detected [ 3.493932] mmcblk0boot1: mmc0:0001 DJUD4R partition 2 31.9 MiB [ 3.499586] thermal emergency: shutdown target cpus 1-7 [ 3.503347] mmcblk0rpmb: mmc0:0001 DJUD4R partition 3 4.00 MiB, chardev (236:0) [ 3.507096] thermal emergency: freq scaled target cpus 0 [ 3.507353] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs [ 3.543295] rcar-pcie ee800000.pcie: host bridge /soc/pcie@ee800000 ranges: [ 3.548906] usb 2-1.1.1: new high-speed USB device number 5 using ehci-platform [ 3.550295] rcar-pcie ee800000.pcie: IO 0x00ee900000..0x00ee9fffff -> 0x0000000000 [ 3.565660] rcar-pcie ee800000.pcie: MEM 0x00eea00000..0x00eebfffff -> 0x00eea00000 [ 3.573760] rcar-pcie ee800000.pcie: MEM 0x00c0000000..0x00c7ffffff -> 0x00c0000000 [ 3.581854] rcar-pcie ee800000.pcie: MEM 0x00c8000000..0x00cfffffff -> 0x00c8000000 [ 3.589953] rcar-pcie ee800000.pcie: IB MEM 0x0040000000..0x007fffffff -> 0x0040000000 [ 3.667125] usb-storage 2-1.1.1:1.0: USB Mass Storage device detected [ 3.674147] scsi host0: usb-storage 2-1.1.1:1.0 [ 3.744911] usb 2-1.4: new full-speed USB device number 6 using ehci-platform [ 3.864372] input: ILITEK ILITEK-TP as /devices/platform/soc/ee0a0100.usb/usb2/2-1/2-1.4/2-1.4:1.0/0003:222A:0141.0001/input/input1 [ 3.872516] rcar-pcie ee800000.pcie: PCIe link down [ 3.876426] hid-multitouch 0003:222A:0141.0001: input: USB HID v1.10 Device [ILITEK ILITEK-TP] on usb-ee0a0100.usb-1.4/input0 [ 3.890971] cpu cpu0: EM: created perf domain [ 3.893937] input: ILITEK ILITEK-TP Mouse as /devices/platform/soc/ee0a0100.usb/usb2/2-1/2-1.4/2-1.4:1.1/0003:222A:0141.0002/input/input2 [ 3.897149] cpu cpu4: EM: created perf domain [ 3.909296] hid-generic 0003:222A:0141.0002: input: USB HID v1.10 Mouse [ILITEK ILITEK-TP] on usb-ee0a0100.usb-1.4/input1 [ 3.914622] renesas_sdhi_internal_dmac ee100000.mmc: Got CD GPIO [ 3.940900] usb 2-1.1.3: new high-speed USB device number 7 using ehci-platform [ 3.959601] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0 [ 3.967398] [drm] Device feb00000.display probed [ 3.984844] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.042045] renesas_sdhi_internal_dmac ee160000.mmc: mmc2 base at 0x00000000ee160000, max clock rate 50 MHz [ 4.061949] renesas_sdhi_internal_dmac ee160000.mmc: card claims to support voltages below defined range [ 4.085294] mmc2: new high speed SDIO card at address 0001 [ 4.109002] mmc1: new ultra high speed SDR104 SDHC card at address 59b4 [ 4.109493] mmcblk1: mmc1:59b4 LX32G 29.5 GiB [ 4.110611] mmcblk1: p1 [ 4.136953] Console: switching to colour frame buffer device 160x50 [ 4.152909] usb 2-1.1.4: new full-speed USB device number 8 using ehci-platform [ 4.182308] rcar-du feb00000.display: [drm] fb0: rcar-dudrmfb frame buffer device [ 4.193620] input: keyboard as /devices/platform/keyboard/input/input4 [ 4.202207] ALSA device list: [ 4.205194] #0: ak4613 [ 4.207725] #1: pcm3168a [ 4.210432] #2: radio [ 4.212885] #3: wl18xx [ 4.215640] md: Waiting for all devices to be available before autodetect [ 4.222439] md: If you don't use raid, use raid=noautodetect [ 4.228108] md: Autodetecting RAID arrays. [ 4.232208] md: autorun ... [ 4.235001] md: ... autorun DONE. [ 4.249303] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.257445] VFS: Mounted root (ext4 filesystem) on device 179:97. [ 4.264085] devtmpfs: mounted [ 4.268837] Freeing unused kernel memory: 3968K [ 4.273425] Run /sbin/init as init process [ 4.277520] with arguments: [ 4.277522] /sbin/init [ 4.277524] with environment: [ 4.277527] HOME=/ [ 4.277529] TERM=linux [ 4.605647] SELinux: policy capability network_peer_controls=1 [ 4.611601] SELinux: policy capability open_perms=1 [ 4.616568] SELinux: policy capability extended_socket_class=1 [ 4.622486] SELinux: policy capability always_check_network=0 [ 4.628316] SELinux: policy capability cgroup_seclabel=1 [ 4.633711] SELinux: policy capability nnp_nosuid_transition=1 [ 4.639628] SELinux: policy capability genfs_seclabel_symlinks=0 [ 4.709099] audit: type=1403 audit(4.707:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 4.719299] systemd[1]: Successfully loaded SELinux policy in 234.320ms. [ 4.759912] systemd[1]: System time before build time, advancing clock. [ 4.809411] audit: type=1400 audit(1674500000.047:3): avc: denied { confidentiality } for pid=1 comm="systemd" lockdown_reason="use of tracefs" scontext=system_u:system_r:init_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=lockdown permissive=1 [ 4.809841] NET: Registered protocol family 10 [ 4.836928] Segment Routing with IPv6 [ 4.905009] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 32.485ms. [ 4.938187] systemd[1]: systemd 250.5+ running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 4.969992] systemd[1]: Detected architecture arm64. [ 5.017779] systemd[1]: Hostname set to . [ 5.031498] systemd[1]: Initializing machine ID from random generator. [ 5.122460] audit: type=1400 audit(1674500000.359:4): avc: denied { read } for pid=297 comm="systemd-gpt-aut" name="mmcblk1" dev="devtmpfs" ino=234 scontext=system_u:system_r:systemd_generator_t:s0 tcontext=system_u:object_r:removable_device_t:s0 tclass=blk_file permissive=1 [ 5.147174] audit: type=1400 audit(1674500000.359:5): avc: denied { open } for pid=297 comm="systemd-gpt-aut" path="/dev/mmcblk1" dev="devtmpfs" ino=234 scontext=system_u:system_r:systemd_generator_t:s0 tcontext=system_u:object_r:removable_device_t:s0 tclass=blk_file permissive=1 [ 5.172213] audit: type=1400 audit(1674500000.359:6): avc: denied { getattr } for pid=297 comm="systemd-gpt-aut" path="/dev/mmcblk1" dev="devtmpfs" ino=234 scontext=system_u:system_r:systemd_generator_t:s0 tcontext=system_u:object_r:removable_device_t:s0 tclass=blk_file permissive=1 [ 5.197541] audit: type=1400 audit(1674500000.359:7): avc: denied { ioctl } for pid=297 comm="systemd-gpt-aut" path="/dev/mmcblk1" dev="devtmpfs" ino=234 ioctlcmd=0x1272 scontext=system_u:system_r:systemd_generator_t:s0 tcontext=system_u:object_r:removable_device_t:s0 tclass=blk_file permissive=1 [ 5.329045] scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 4 [ 5.338582] sd 0:0:0:0: [sda] 15417344 512-byte logical blocks: (7.89 GB/7.35 GiB) [ 5.347044] sd 0:0:0:0: [sda] Write Protect is off [ 5.351850] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 5.352791] sd 0:0:0:0: [sda] No Caching mode page found [ 5.358112] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.395971] sda: sda1 [ 5.401868] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.406786] systemd[1]: Queued start job for default target Graphical Interface. [ 5.476859] systemd[1]: Created slice Slice /system/agl-session. [ 5.502617] systemd[1]: Created slice Slice /system/getty. [ 5.526299] systemd[1]: Created slice Slice /system/modprobe. [ 5.554322] systemd[1]: Created slice Slice /system/serial-getty. [ 5.578154] systemd[1]: Created slice Slice /system/wireplumber. [ 5.601896] systemd[1]: Created slice User and Session Slice. [ 5.625486] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.649316] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.673087] systemd[1]: Reached target Host and Network Name Lookups. [ 5.696957] systemd[1]: Reached target Path Units. [ 5.716961] systemd[1]: Reached target Remote File Systems. [ 5.736952] systemd[1]: Reached target Slice Units. [ 5.756975] systemd[1]: Reached target Swaps. [ 5.782667] systemd[1]: Listening on Process Core Dump Socket. [ 5.805607] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.830551] systemd[1]: Listening on Journal Audit Socket. [ 5.854792] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.877904] systemd[1]: Listening on Journal Socket. [ 5.897921] systemd[1]: Listening on Network Service Netlink Socket. [ 5.924427] systemd[1]: Listening on udev Control Socket. [ 5.945873] systemd[1]: Listening on udev Kernel Socket. [ 5.966620] systemd[1]: Listening on User Database Manager Socket. [ 5.993421] systemd[1]: Mounting Huge Pages File System... [ 6.016970] systemd[1]: Mounting POSIX Message Queue File System... [ 6.040528] systemd[1]: Mounting Kernel Debug File System... [ 6.064747] systemd[1]: Mounting Kernel Trace File System... [ 6.090278] systemd[1]: Mounting Temporary Directory /tmp... [ 6.113204] systemd[1]: Starting Create List of Static Device Nodes... [ 6.140653] systemd[1]: Starting Load Kernel Module configfs... [ 6.164635] systemd[1]: Starting Load Kernel Module drm... [ 6.188510] systemd[1]: Starting Load Kernel Module fuse... [ 6.211928] fuse: init (API version 7.32) [ 6.213961] systemd[1]: Starting Start psplash boot splash screen... [ 6.241291] systemd[1]: Starting SELinux autorelabel service loading... [ 6.281358] systemd[1]: Starting SELinux init for /dev service loading... [ 6.305334] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 6.324487] systemd[1]: Starting Journal Service... [ 6.352155] systemd[1]: Starting Load Kernel Modules... [ 6.370398] mmngr: loading out-of-tree module taints kernel. [ 6.377635] rgnmm_drv mmngr: assigned reserved memory node linux,multimedia@70000000 [ 6.381454] systemd[1]: Starting Generate network units from Kernel command line... [ 6.383575] audit: type=1400 audit(1674500001.615:8): avc: denied { read } for pid=322 comm="systemd-journal" name="machine-id" dev="mmcblk1p1" ino=204 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file permissive=1 [ 6.383585] audit: type=1400 audit(1674500001.615:9): avc: denied { open } for pid=322 comm="systemd-journal" path="/etc/machine-id" dev="mmcblk1p1" ino=204 scontext=system_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file permissive=1 [ 6.464242] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.489966] systemd[1]: Starting Coldplug All udev Devices... [ 6.502710] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null) [ 6.518986] systemd[1]: Started Start psplash boot splash screen. [ 6.542180] audit: type=1130 audit(1674500001.779:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=psplash-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.542850] systemd[1]: Started Journal Service. [ 6.570020] sllin: serial line LIN interface driver [ 6.578915] uio_pdrv_genirq: unknown parameter 'uio_pdrv_genirq' ignored [ 6.593566] audit: type=1130 audit(1674500001.831:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.713082] audit: type=1130 audit(1674500001.951:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.749033] audit: type=1130 audit(1674500001.987:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=modprobe@configfs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 6.981714] systemd-journald[322]: Received client request to flush runtime journal. [ 8.022369] random: crng init done [ 8.965402] (stk) :sysfs entries created [ 8.978846] CAN device driver interface [ 9.004035] rcar_can e6c30000.can: device registered (IRQ128) [ 9.015140] rcar_can e6c38000.can: device registered (IRQ129) [ 9.031005] ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 [ 9.055327] st-gyro-i2c 16-006b: supply vdd not found, using dummy regulator [ 9.067573] st-gyro-i2c 16-006b: supply vddio not found, using dummy regulator [ 9.094342] st-lsm9ds0-i2c 16-001d: supply vdd not found, using dummy regulator [ 9.101386] iio iio:device0: registered gyroscope lsm9ds0_gyro [ 9.102538] Bluetooth: Core ver 2.22 [ 9.110352] st-lsm9ds0-i2c 16-001d: supply vddio not found, using dummy regulator [ 9.112958] NET: Registered protocol family 31 [ 9.128856] Bluetooth: HCI device and connection manager initialized [ 9.135588] Bluetooth: HCI socket layer initialized [ 9.140686] Bluetooth: L2CAP socket layer initialized [ 9.145905] Bluetooth: SCO socket layer initialized [ 9.152877] iio iio:device1: registered accelerometer lsm9ds0 [ 9.189909] Bluetooth: HCI UART driver ver 2.3 [ 9.194623] Bluetooth: HCI UART protocol H4 registered [ 9.198262] iio iio:device2: registered magnetometer lsm9ds0 [ 9.205037] ccree e6601000.crypto: ARM ccree device initialized [ 9.205223] Bluetooth: HCI UART protocol BCSP registered [ 9.205321] Bluetooth: HCI UART protocol LL registered [ 9.205920] Bluetooth: HCI UART protocol Broadcom registered [ 9.211537] hci-ti: probe of serial0-0 failed with error -16 [ 9.217047] Bluetooth: HCI UART protocol QCA registered [ 9.426703] usbcore: registered new interface driver btusb [ 9.435063] usb 2-1.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ 9.469711] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.497454] usb 2-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 9.503201] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.508625] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ 9.534627] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 9.543352] cfg80211: failed to load regulatory.db [ 9.554582] i2c i2c-25: Added multiplexed i2c bus 26 [ 9.570084] rtl2832 25-0010: Realtek RTL2832 successfully attached [ 9.581690] usb 2-1.3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ 9.650115] i2c i2c-26: fc0012: Fitipower FC0012 successfully identified [ 9.672997] rtl2832_sdr rtl2832_sdr.7.auto: Registered as swradio0 [ 9.680097] rtl2832_sdr rtl2832_sdr.7.auto: Realtek RTL2832 SDR attached [ 9.686884] rtl2832_sdr rtl2832_sdr.7.auto: SDR API is still slightly experimental and functionality changes may follow [ 9.706272] Registered IR keymap rc-empty [ 9.710476] rc rc0: Realtek RTL2832U reference design as /devices/platform/soc/ee0a0100.usb/usb2/2-1/2-1.3/rc/rc0 [ 9.722301] input: Realtek RTL2832U reference design as /devices/platform/soc/ee0a0100.usb/usb2/2-1/2-1.3/rc/rc0/input5 [ 9.734770] usb 2-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs [ 9.751462] usb 2-1.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ 9.763474] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 9.788356] usb 2-1.1.3: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 9.798676] usbcore: registered new interface driver ath9k_htc [ 9.835160] rcar_sound ec500000.sound: Can't update kctrl when idle [ 9.853369] wl18xx_driver wl18xx.6.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2 [ 9.864118] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2 [ 9.872934] wlcore: WARNING falling back to default config [ 10.099626] usb 2-1.1.3: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 10.350241] ath9k_htc 2-1.1.3:1.0: ath9k_htc: HTC initialized with 33 credits [ 10.365958] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 10.373562] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead. [ 10.382287] wlcore: WARNING This default nvs file can be removed from the file system [ 10.391998] wlcore: loaded [ 10.593988] ath9k_htc 2-1.1.3:1.0: ath9k_htc: FW Version: 1.4 [ 10.599842] ath9k_htc 2-1.1.3:1.0: FW RMW support: On [ 10.607949] ath: EEPROM regdomain: 0x809c [ 10.607958] ath: EEPROM indicates we should expect a country code [ 10.607964] ath: doing EEPROM country->regdmn map search [ 10.607967] ath: country maps to regdmn code: 0x52 [ 10.607974] ath: Country alpha2 being used: CN [ 10.607977] ath: Regpair used: 0x52 [ 10.617630] ieee80211 phy1: Atheros AR9271 Rev:1 [ 12.205508] rcar_sound ec500000.sound: Can't update kctrl when idle [ 12.531541] PVR_K: 704: Read BVNC 4.46.6.62 from HW device registers [ 12.539945] PVR_K: 704: RGX Device registered with BVNC 4.46.6.62 [ 12.547557] pvrsrvkm fd000000.gsx: Found 4 OPP points. [ 12.552962] pvrsrvkm fd000000.gsx: opp[1/4]: (200000000 Hz, 830000 uV) [ 12.559597] pvrsrvkm fd000000.gsx: opp[2/4]: (300000000 Hz, 830000 uV) [ 12.566208] pvrsrvkm fd000000.gsx: opp[3/4]: (400000000 Hz, 830000 uV) [ 12.572817] pvrsrvkm fd000000.gsx: opp[4/4]: (600000000 Hz, 830000 uV) [ 12.579453] DVFS : Changed GPU clock to 600000000 [Hz] [ 12.589980] PVR_K: 704: RGX Firmware image 'rgx.fw.4.46.6.62' loaded [ 12.627147] PVR_K: 704: Shader binary image 'rgx.sh.4.46.6.62' loaded [ 12.642504] [drm] Initialized pvr 1.15.6052913 20170530 for fd000000.gsx on minor 1 [ 13.308455] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.315003] Bluetooth: BNEP filters: protocol multicast [ 13.317781] rcar_can e6c38000.can can1: bitrate error 0.2% [ 13.326343] Bluetooth: BNEP socket layer initialized [ 13.336678] rcar_can e6c30000.can can0: bitrate error 0.2% [ 13.351758] IPv6: ADDRCONF(NETDEV_CHANGE): can1: link becomes ready [ 13.416981] Bluetooth: RFCOMM TTY layer initialized [ 13.421938] Bluetooth: RFCOMM socket layer initialized [ 13.427221] Bluetooth: RFCOMM ver 1.11 [ 13.989413] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=180) [ 14.031976] can: controller area network core [ 14.036680] NET: Registered protocol family 29 [ 14.096975] can: raw protocol [ 14.364989] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready [ 14.436185] dvb_usb_v2: 'Realtek RTL2832U reference design:2-1.3' successfully deinitialized and disconnected [ 14.824574] usb 2-1.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ 14.863133] usb 2-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 14.872679] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ 14.910143] i2c i2c-25: Added multiplexed i2c bus 26 [ 14.916594] rtl2832 25-0010: Realtek RTL2832 successfully attached [ 14.927055] usb 2-1.3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ 14.953042] i2c i2c-26: fc0012: Fitipower FC0012 successfully identified [ 14.969189] rtl2832_sdr rtl2832_sdr.7.auto: Registered as swradio0 [ 14.975449] rtl2832_sdr rtl2832_sdr.7.auto: Realtek RTL2832 SDR attached [ 14.982580] rtl2832_sdr rtl2832_sdr.7.auto: SDR API is still slightly experimental and functionality changes may follow [ 15.004986] Registered IR keymap rc-empty [ 15.012408] rc rc0: Realtek RTL2832U reference design as /devices/platform/soc/ee0a0100.usb/usb2/2-1/2-1.3/rc/rc0 [ 15.024376] input: Realtek RTL2832U reference design as /devices/platform/soc/ee0a0100.usb/usb2/2-1/2-1.3/rc/rc0/input6 [ 15.049000] usb 2-1.3: dvb_usb_v2: schedule remote query interval to 200 msecs [ 15.064987] usb 2-1.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ 15.315340] dvb_usb_v2: 'Realtek RTL2832U reference design:2-1.3' successfully deinitialized and disconnected [ 17.099738] ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 17.107497] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.147210] 8021q: 802.1Q VLAN Support v1.8 [ 35.804927] snd-3.3v: disabling [ 35.808075] snd-vcc5v: disabling [ 35.811320] wlan-en-regulator: disabling [ 35.815259] mPCIe 3v3: disabling [ 35.818496] mPCIe 1v8: disabling [ 478.440395] ravb e6800000.ethernet eth0: Link is Down [ 493.616389] wlcore: PHY firmware version: Rev 8.2.0.0.243 [ 493.707336] wlcore: firmware booted (Rev 8.9.0.0.83) [ 509.352041] wlan1: authenticate with d2:21:f9:80:2f:d1 [ 509.483094] wlan1: send auth to d2:21:f9:80:2f:d1 (try 1/3) [ 509.490152] wlan1: authenticated [ 509.497074] wlan1: associate with d2:21:f9:80:2f:d1 (try 1/3) [ 509.505246] wlan1: RX AssocResp from d2:21:f9:80:2f:d1 (capab=0x31 status=0 aid=6) [ 509.517985] wlan1: associated [ 509.527811] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 673.809884] input: rage ops (AVRCP) as /devices/virtual/input/input7 [ 844.677619] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 844.684164] ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off