microcode: microcode updated early to revision 0x32, date = 2018-05-11 Linux version 4.19.13-intel-pk-standard (oe-user@oe-host) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Mon Jun 3 23:57:37 UTC 2019 Command line: initrd=\microcode.cpio root=PARTUUID=0f7e6225-02 rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 reboot=efi x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64 x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64 x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format. BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved BIOS-e820: [mem 0x0000000012151000-0x00000000777b4fff] usable BIOS-e820: [mem 0x00000000777b5000-0x00000000798befff] reserved BIOS-e820: [mem 0x00000000798bf000-0x00000000798d3fff] ACPI data BIOS-e820: [mem 0x00000000798d4000-0x0000000079cdbfff] ACPI NVS BIOS-e820: [mem 0x0000000079cdc000-0x000000007a080fff] reserved BIOS-e820: [mem 0x000000007a081000-0x000000007a3eefff] usable BIOS-e820: [mem 0x000000007a3ef000-0x000000007a3effff] ACPI NVS BIOS-e820: [mem 0x000000007a3f0000-0x000000007a409fff] reserved BIOS-e820: [mem 0x000000007a40a000-0x000000007a964fff] usable BIOS-e820: [mem 0x000000007a965000-0x000000007a966fff] reserved BIOS-e820: [mem 0x000000007a967000-0x000000007affffff] usable BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved NX (Execute Disable) protection: active extended physical RAM map: reserve setup_data: [mem 0x0000000000000000-0x000000000003efff] usable reserve setup_data: [mem 0x000000000003f000-0x000000000003ffff] reserved reserve setup_data: [mem 0x0000000000040000-0x000000000009dfff] usable reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved reserve setup_data: [mem 0x0000000012151000-0x000000006efc6017] usable reserve setup_data: [mem 0x000000006efc6018-0x000000006efd6057] usable reserve setup_data: [mem 0x000000006efd6058-0x00000000777b4fff] usable reserve setup_data: [mem 0x00000000777b5000-0x00000000798befff] reserved reserve setup_data: [mem 0x00000000798bf000-0x00000000798d3fff] ACPI data reserve setup_data: [mem 0x00000000798d4000-0x0000000079cdbfff] ACPI NVS reserve setup_data: [mem 0x0000000079cdc000-0x000000007a080fff] reserved reserve setup_data: [mem 0x000000007a081000-0x000000007a3eefff] usable reserve setup_data: [mem 0x000000007a3ef000-0x000000007a3effff] ACPI NVS reserve setup_data: [mem 0x000000007a3f0000-0x000000007a409fff] reserved reserve setup_data: [mem 0x000000007a40a000-0x000000007a964fff] usable reserve setup_data: [mem 0x000000007a965000-0x000000007a966fff] reserved reserve setup_data: [mem 0x000000007a967000-0x000000007affffff] usable reserve setup_data: [mem 0x000000007b000000-0x000000007fffffff] reserved reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved efi: EFI v2.50 by American Megatrends efi: ACPI=0x798c6000 ACPI 2.0=0x798c6000 SMBIOS=0x79eed000 SMBIOS 3.0=0x79eec000 TPMEventLog=0x6efd8018 SMBIOS 3.0.0 present. DMI: AAEON UP-APL01/UP-APL01, BIOS UPA1AM21 09/01/2017 tsc: Detected 1094.400 MHz processor last_pfn = 0x7b000 max_arch_pfn = 0x400000000 x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT Scanning 1 areas for low memory corruption Using GB pages for direct mapping Secure boot disabled RAMDISK: [mem 0x77314000-0x774b7fff] ACPI: Early table checksum verification disabled ACPI: RSDP 0x00000000798C6000 000024 (v02 ALASKA) ACPI: XSDT 0x00000000798C60C0 0000EC (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FACP 0x00000000798CE040 000114 (v06 ALASKA A M I 01072009 AMI 00010013) ACPI: DSDT 0x00000000798C6250 007DEC (v02 ALASKA A M I 01072009 INTL 20120913) ACPI: FACS 0x0000000079CDB080 000040 ACPI: FPDT 0x00000000798CE160 000044 (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: FIDT 0x00000000798CE1B0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) ACPI: MCFG 0x00000000798CE250 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) ACPI: HROT 0x00000000798CE290 0000DB (v01 INTEL EDK2 00000005 INTL 0100000D) ACPI: DBG2 0x00000000798CE370 000072 (v00 INTEL EDK2 00000003 BRXT 0100000D) ACPI: DBGP 0x00000000798CE3F0 000034 (v01 INTEL EDK2 00000003 BRXT 0100000D) ACPI: HPET 0x00000000798CE430 000038 (v01 INTEL EDK2 00000003 BRXT 0100000D) ACPI: LPIT 0x00000000798CE470 00005C (v01 INTEL EDK2 00000003 BRXT 0100000D) ACPI: APIC 0x00000000798CE4D0 000084 (v03 INTEL EDK2 00000003 BRXT 0100000D) ACPI: NPKT 0x00000000798CE560 000065 (v01 INTEL EDK2 00000003 BRXT 0100000D) ACPI: PRAM 0x00000000798CE5D0 000030 (v01 INTEL EDK2 00000003 BRXT 0100000D) ACPI: WSMT 0x00000000798CE600 000028 (v01 INTEL EDK2 00000003 BRXT 0100000D) ACPI: SSDT 0x00000000798CE630 000AC5 (v01 AAEON PINCTRL 00000001 INTL 20120913) ACPI: SSDT 0x00000000798CF100 00002C (v01 Intel_ Platform 00001000 INTL 20120913) ACPI: SSDT 0x00000000798CF130 0003DF (v02 PmRef Cpu0Ist 00003000 INTL 20120913) ACPI: SSDT 0x00000000798CF510 00072B (v02 CpuRef CpuSsdt 00003000 INTL 20120913) ACPI: SSDT 0x00000000798CFC40 00032D (v02 PmRef Cpu0Tst 00003000 INTL 20120913) ACPI: SSDT 0x00000000798CFF70 00017C (v02 PmRef ApTst 00003000 INTL 20120913) ACPI: SSDT 0x00000000798D00F0 002760 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) ACPI: UEFI 0x00000000798D2850 000042 (v01 ALASKA A M I 00000000 00000000) ACPI: TPM2 0x00000000798D28A0 000034 (v03 Tpm2Tabl 00000001 AMI 00000000) ACPI: DMAR 0x00000000798D28E0 0000B0 (v01 INTEL EDK2 00000003 BRXT 0100000D) ACPI: WDAT 0x00000000798D2990 000104 (v01 00000000 00000000) ACPI: NHLT 0x00000000798D2AA0 00050D (v00 INTEL EDK2 00000002 01000013) Zone ranges: DMA [mem 0x0000000000001000-0x0000000000ffffff] DMA32 [mem 0x0000000001000000-0x000000007affffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000001000-0x000000000003efff] node 0: [mem 0x0000000000040000-0x000000000009dfff] node 0: [mem 0x0000000000100000-0x000000000fffffff] node 0: [mem 0x0000000012151000-0x00000000777b4fff] node 0: [mem 0x000000007a081000-0x000000007a3eefff] node 0: [mem 0x000000007a40a000-0x000000007a964fff] node 0: [mem 0x000000007a967000-0x000000007affffff] Reserved but unavailable: 98 pages Initmem setup node 0 [mem 0x0000000000001000-0x000000007affffff] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff] ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 smpboot: Allowing 4 CPUs, 2 hotplug CPUs [mem 0x80000000-0xcfffffff] available for PCI devices clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns random: get_random_bytes called from start_kernel+0x95/0x515 with crng_init=0 setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 percpu: Embedded 44 pages/cpu @(____ptrval____) s140120 r8192 d31912 u524288 Built 1 zonelists, mobility grouping on. Total pages: 476813 Kernel command line: initrd=\microcode.cpio root=PARTUUID=0f7e6225-02 rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 reboot=efi Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1752516K/1938824K available (14348K kernel code, 1346K rwdata, 3252K rodata, 1532K init, 1084K bss, 186308K reserved, 0K cma-reserved) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 ftrace: allocating 42377 entries in 166 pages rcu: Preemptible hierarchical RCU implementation. rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. Tasks RCU enabled. rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16 Console: colour dummy device 80x25 console [tty0] enabled console [ttyS0] enabled ACPI: Core revision 20180810 clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns APIC: Switch to symmetric I/O mode setup ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=1094400) pid_max: default: 32768 minimum: 301 Security Framework initialized Smack: Initializing. Smack: IPv6 port labeling enabled. Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) mce: CPU supports 7 MCE banks Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 Spectre V2 : Mitigation: Full generic retpoline Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch Spectre V2 : Enabling Restricted Speculation for firmware calls Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier Freeing SMP alternatives memory: 36K smpboot: CPU0: Intel(R) Celeron(R) CPU N3350 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9) Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver. ... version: 4 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... x86: Booting SMP configuration: .... node #0, CPUs: #1 smp: Brought up 1 node, 2 CPUs smpboot: Max logical packages: 2 smpboot: Total of 2 processors activated (4377.60 BogoMIPS) devtmpfs: initialized PM: Registering ACPI NVS region [mem 0x798d4000-0x79cdbfff] (4227072 bytes) PM: Registering ACPI NVS region [mem 0x7a3ef000-0x7a3effff] (4096 bytes) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) xor: measuring software checksum speed prefetch64-sse: 5248.000 MB/sec generic_sse: 4596.000 MB/sec xor: using function: prefetch64-sse (5248.000 MB/sec) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 audit: initializing netlink subsys (disabled) audit: type=2000 audit(1561126966.082:1): state=initialized audit_enabled=0 res=1 cpuidle: using governor menu ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type PCI registered dca service started, version 1.12.1 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages cryptd: max_cpu_qlen set to 1000 raid6: sse2x1 gen() 2472 MB/s raid6: sse2x1 xor() 1449 MB/s raid6: sse2x2 gen() 2710 MB/s raid6: sse2x2 xor() 1681 MB/s raid6: sse2x4 gen() 2964 MB/s raid6: sse2x4 xor() 1509 MB/s raid6: using algorithm sse2x4 gen() 2964 MB/s raid6: .... xor() 1509 MB/s, rmw enabled raid6: using ssse3x2 recovery algorithm ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Added _OSI(Linux-Dell-Video) ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) ACPI: 8 ACPI AML tables successfully acquired and loaded ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF97E8F0378C00 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF97E8F0378A00 00015F (v02 PmRef ApIst 00003000 INTL 20120913) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0xFFFF97E8F0343D80 00008D (v02 PmRef ApCst 00003000 INTL 20120913) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: Enabled 9 GPEs in block 00 to 7F ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0070-0x0077] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:13.0: PCI bridge to [bus 01] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128) pci 0000:00:13.1: PCI bridge to [bus 02] pci 0000:03:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256) pci 0000:03:00.0: Max Payload Size set to 128 (was 128, max 128) pci 0000:00:13.2: PCI bridge to [bus 03] pci 0000:00:13.3: PCI bridge to [bus 04] pci 0000:00:14.0: PCI bridge to [bus 05] pci 0000:00:14.1: PCI bridge to [bus 06] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled. pci 0000:00:02.0: vgaarb: setting as boot VGA device pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:00:02.0: vgaarb: bridge control possible vgaarb: loaded SCSI subsystem initialized ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Registered efivars operations Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 19.200000 MHz counter clocksource: Switched to clocksource tsc-early pnp: PnP ACPI init system 00:00: [io 0x0680-0x069f] has been reserved system 00:00: [io 0x0400-0x047f] has been reserved system 00:00: [io 0x0500-0x05fe] has been reserved system 00:01: [mem 0xe0000000-0xefffffff] has been reserved system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved pnp: PnP ACPI: found 3 devices clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns pci 0000:00:13.0: PCI bridge to [bus 01] pci 0000:00:13.1: PCI bridge to [bus 02] pci 0000:00:13.1: bridge window [io 0xe000-0xefff] pci 0000:00:13.1: bridge window [mem 0x91400000-0x914fffff] pci 0000:00:13.2: PCI bridge to [bus 03] pci 0000:00:13.2: bridge window [io 0xd000-0xdfff] pci 0000:00:13.2: bridge window [mem 0x91300000-0x913fffff] pci 0000:00:13.3: PCI bridge to [bus 04] pci 0000:00:14.0: PCI bridge to [bus 05] pci 0000:00:14.1: PCI bridge to [bus 06] NET: Registered protocol family 2 tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] Trying to unpack rootfs image as initramfs... Freeing initrd memory: 1680K RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer RAPL PMU: hw unit of domain pp0-core 2^-14 Joules RAPL PMU: hw unit of domain package 2^-14 Joules RAPL PMU: hw unit of domain dram 2^-14 Joules RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns clocksource: Switched to clocksource tsc Scanning for low memory corruption every 60 seconds Initialise system trusted keyrings workingset: timestamp_bits=46 max_order=19 bucket_order=0 NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered Key type asymmetric registered Asymmetric key parser 'x509' registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ioatdma: Intel(R) QuickData Technology Driver 4.00 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Linux agpgart interface v0.103 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b) mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b) sdhci-pci 0000:00:1e.0: enabling device (0000 -> 0002) mmc1: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit sdhci-pltfm: SDHCI platform and OF driver helper brd: module loaded loop: module loaded idma64 idma64.0: Found Intel integrated DMA 64-bit idma64 idma64.1: Found Intel integrated DMA 64-bit idma64 idma64.2: Found Intel integrated DMA 64-bit idma64 idma64.3: Found Intel integrated DMA 64-bit idma64 idma64.4: Found Intel integrated DMA 64-bit idma64 idma64.5: Found Intel integrated DMA 64-bit idma64 idma64.6: Found Intel integrated DMA 64-bit idma64 idma64.7: Found Intel integrated DMA 64-bit idma64 idma64.8: Found Intel integrated DMA 64-bit console [ttyS0] disabled dw-apb-uart.8: ttyS0 at MMIO 0x91524000 (irq = 4, base_baud = 115200) is a 16550A mmc0: new HS400 MMC card at address 0001 console [ttyS0] enabled mmcblk0: mmc0:0001 HBG4a2 29.1 GiB idma64 idma64.9: Found Intel integrated DMA 64-bit mmcblk0boot0: mmc0:0001 HBG4a2 partition 1 4.00 MiB dw-apb-uart.9: ttyS1 at MMIO 0x91522000 (irq = 5, base_baud = 115200) is a 16550A mmcblk0boot1: mmc0:0001 HBG4a2 partition 2 4.00 MiB idma64 idma64.10: Found Intel integrated DMA 64-bit mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB, chardev (246:0) idma64 idma64.11: Found Intel integrated DMA 64-bit hyper_dmabuf_starting: Initialization started No backend configured for hyper_dmabuf in kernel config Hyper_dmabuf: no backend found Uniform Multi-Platform E-IDE driver ide-gd driver 1.18 ide-cd driver 5.00 mmcblk0: p1 p2 p3 ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst scsi host0: ahci scsi host1: ahci ata1: SATA max UDMA/133 abar m2048@0x91536000 port 0x91536100 irq 120 ata2: SATA max UDMA/133 abar m2048@0x91536000 port 0x91536180 irq 120 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k igb: Copyright (c) 2007-2014 Intel Corporation. libphy: r8169: probed r8169 0000:02:00.0 eth0: RTL8168g/8111g, 00:07:32:4b:90:2d, XID 4c000880, IRQ 121 r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] libphy: r8169: probed r8169 0000:03:00.0 eth1: RTL8168g/8111g, 00:07:32:4b:90:2e, XID 4c000880, IRQ 122 r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver xhci_hcd 0000:00:15.0: xHCI Host Controller xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected xhci_hcd 0000:00:15.0: xHCI Host Controller xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed hub 2-0:1.0: USB hub found hub 2-0:1.0: 7 ports detected usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 i8042: PNP: No PS/2 controller found. mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: registered as rtc0 rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A i801_smbus 0000:00:1f.1: PCI INT A: not connected i801_smbus 0000:00:1f.1: SPD Write Disable is set i801_smbus 0000:00:1f.1: SMBus using polling usbcore: registered new interface driver i2c-tiny-usb iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com intel_pstate: Intel P-state driver initializing usbcore: registered new interface driver usbhid usbhid: USB HID core driver intel_telemetry_core Init usbcore: registered new interface driver snd-usb-audio u32 classifier Actions configured NET: Registered protocol family 10 Segment Routing with IPv6 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 36 Key type dns_resolver registered microcode: sig=0x506c9, pf=0x1, revision=0x32 ata1: SATA link down (SStatus 4 SControl 300) microcode: Microcode Update Driver: v2.2. SSE version of gcm_enc/dec engaged. sched_clock: Marking stable (3251305854, 54742823)->(3324931061, -18882384) registered taskstats version 1 Loading compiled-in X.509 certificates Btrfs loaded, crc32c=crc32c-generic Key type encrypted registered console [netcon0] enabled netconsole: network logging started rtc_cmos 00:02: setting system clock to 2019-06-21 14:22:49 UTC (1561126969) Invalid pltconfig, ensure IPC1 device is enabled in BIOS ALSA device list: #0: Loopback 1 usb 2-4: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata2.00: ATA-11: GOODRAM, SBFM21.1, max UDMA/133 ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA GOODRAM 21.1 PQ: 0 ANSI: 5 usb-storage 2-4:1.0: USB Mass Storage device detected sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) sd 1:0:0:0: [sda] Write Protect is off scsi host2: usb-storage 2-4:1.0 sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 1:0:0:0: [sda] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Waiting for root device PARTUUID=0f7e6225-02... scsi 2:0:0:0: Direct-Access SanDisk Extreme Pro 0 PQ: 0 ANSI: 6 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] 250085376 512-byte logical blocks: (128 GB/119 GiB) sd 2:0:0:0: [sdb] Write Protect is off random: fast init done sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 2:0:0:0: [sdb] Attached SCSI removable disk EXT4-fs (sdb2): INFO: recovery required on readonly filesystem EXT4-fs (sdb2): write access will be enabled during recovery EXT4-fs (sdb2): recovery complete EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:18. devtmpfs: mounted Freeing unused kernel image memory: 1532K Write protecting the kernel read-only data: 20480k Freeing unused kernel image memory: 2020K Freeing unused kernel image memory: 844K Run /sbin/init as init process systemd[1]: Successfully loaded Smack policies. systemd[1]: Successfully loaded Smack/CIPSO policies. systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 2.512ms. systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture x86-64. systemd[1]: Set hostname to . random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Listening on udev Kernel Socket. random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Reached target Swap. random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Started Forward Password Requests to Wall Directory Watch. systemd[1]: Reached target Host and Network Name Lookups. systemd[1]: Listening on udev Control Socket. systemd[1]: Listening on Journal Socket. systemd[1]: Mounting Huge Pages File System... random: crng init done random: 7 urandom warning(s) missed due to ratelimiting mostcore: loading out-of-tree module taints kernel. mostcore: init() aim_cdev: init() mostcore: registered new application interfacing module cdev mostcore: registered new application interfacing module networking aim_sound: init() mostcore: registered new application interfacing module sound media: Linux media interface: v0.10 videodev: Linux video capture interface: v2.00 mostcore: registered new application interfacing module v4l usbcore: registered new interface driver hdm_usb EXT4-fs (sdb2): re-mounted. Opts: (null) [drm] Replacing VGA console driver [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem systemd-journald[132]: Received request to flush runtime journal from PID 1 [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7) dwc3-pci 0000:00:15.1: enabling device (0000 -> 0002) r8169 0000:02:00.0 enp2s0: renamed from eth0 r8169 0000:03:00.0 enp3s0: renamed from eth1 pwm-lpss 0000:00:1a.0: can't derive routing for PCI INT A pwm-lpss 0000:00:1a.0: PCI INT A: not connected EFI Variables Facility v0.08 2004-May-17 intel_rapl: Found RAPL domain package intel_rapl: Found RAPL domain core intel_rapl: Found RAPL domain uncore intel_rapl: Found RAPL domain dram [drm] failed to retrieve link info, disabling eDP [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [drm] Cannot find any crtc or sizes [drm] Cannot find any crtc or sizes [drm] Cannot find any crtc or sizes cfg80211: Loading compiled-in X.509 certificates for regulatory database input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card1/input3 input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card1/input4 input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card1/input5 input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card1/input6 input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card1/input7 cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 cfg80211: failed to load regulatory.db Intel(R) Wireless WiFi driver for Linux Copyright(c) 2003- 2015 Intel Corporation AVIRT: core: Alsa Virtual Sound Driver avirt-0.0.1 AVIRT: core: Registered new Audio Path: Loopback Audio Path