[ 0.000188] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.20 [ 0.005750] NOTICE: BL2: PRR is R-Car M3 Ver1.0 [ 0.010333] NOTICE: BL2: Board is Starter Kit Rev1.0 [ 0.015358] NOTICE: BL2: Boot device is HyperFlash(80MHz) [ 0.020784] NOTICE: BL2: LCM state is CM [ 0.024826] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53 [ 0.030814] NOTICE: BL2: DDR3200(rev.0.31)NOTICE: [COLD_BOOT]NOTICE: ..0 [ 0.088015] NOTICE: BL2: DRAM Split is 2ch [ 0.091898] NOTICE: BL2: QoS is default setting(rev.0.19) [ 0.097402] NOTICE: BL2: Lossy Decomp areas [ 0.101575] NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570 [ 0.108660] NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0 [ 0.115572] NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0 [ 0.122487] NOTICE: BL2: v1.4(release):1eee0ad-dirty [ 0.127495] NOTICE: BL2: Built : 14:37:16, Oct 23 2018 [ 0.132682] NOTICE: BL2: Normal boot [ 0.136328] NOTICE: BL2: dst=0xe6320300 src=0x8180000 len=512(0x200) [ 0.142711] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800) [ 0.149331] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000) [ 0.156561] NOTICE: BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000) [ 0.171385] NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000) U-Boot 2015.04 (Oct 23 2018 - 14:37:22) CPU: Renesas Electronics R8A7796 rev 1.0 Board: M3ULCB I2C: ready DRAM: 1.9 GiB Bank #0: 0x048000000 - 0x07fffffff, 896 MiB Bank #1: 0x600000000 - 0x63fffffff, 1 GiB Flash: 64 MiB MMC: sh-sdhi: 0, sh-sdhi: 1 In: serial Out: serial Err: serial Net: ravb Hit any key to stop autoboot: 3 0 => setenv board m3ulcb => setenv soc r8a7796 => setenv bootmode net => setenv set_bootkfile 'setenv bootkfile Image' => setenv bootkaddr 0x48080000 => setenv set_bootdfile 'setenv bootdfile Image-${soc}-${board}.dtb' => setenv bootdaddr 0x48000000 => setenv set_bootifile 'setenv bootifile initramfs-netboot-image-${board}.ext4.gz' => setenv bootiaddr 0x5C3F9520 => setenv bootisize 3A6AB6 => => setenv bootargs_console 'console=ttySC0,115200 ignore_loglevel' => setenv bootargs_video 'video=HDMI-A-1:1920x1080-32@60' => setenv bootargs_extra 'rw rootfstype=ext4 rootwait rootdelay=2' => setenv bootcmd 'run bootcmd_${bootmode}' => setenv bootkload_net 'tftp ${bootkaddr} /tftpboot/kurokawa/AGL/${board}/${bootkfile}' => setenv bootdload_net 'tftp ${bootdaddr} /tftpboot/kurokawa/AGL/${board}/${bootdfile}' => setenv bootiload_net 'tftp ${bootiaddr} /tftpboot/kurokawa/AGL/${board}/${bootifile}' => => setenv bootargs_root_net 'root=/dev/ram0 ramdisk_size=16384 ip=192.168.20.93' => setenv bootload_net 'run set_bootkfile; run bootkload_net; run set_bootdfile; run bootdload_net; run set_bootifile; run bootiload_net' => => setenv bootcmd_net 'setenv bootargs ${bootargs_console} ${bootargs_video} ${bootargs_root_net} ${bootargs_extra} nbd.server=${serverip}; run bootload_net; booti ${bootkaddr} ${bootiaddr}:${bootisize} ${bootdaddr}' => => => => setenv set_bootdfile 'setenv bootdfile Image-${soc}-${board}-kf.dtb' => => run bootcmd ravb connected to Micrel ksz9031 ravb Waiting for PHY auto negotiation to complete... done ravb: 1000Base/Full Using ravb device TFTP from server 192.168.20.20; our IP address is 192.168.20.93 Filename '/tftpboot/kurokawa/AGL/m3ulcb/Image'. Load address: 0x48080000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######### 3.5 MiB/s done Bytes transferred = 19347968 (1273a00 hex) ravb:0 is connected to ravb. Reconnecting to ravb ravb connected to Micrel ksz9031 ravb Waiting for PHY auto negotiation to complete... done ravb: 1000Base/Full Using ravb device TFTP from server 192.168.20.20; our IP address is 192.168.20.93 Filename '/tftpboot/kurokawa/AGL/m3ulcb/Image-r8a7796-m3ulcb-kf.dtb'. Load address: 0x48000000 Loading: *################# 15.6 KiB/s done Bytes transferred = 82288 (14170 hex) ravb:0 is connected to ravb. Reconnecting to ravb ravb connected to Micrel ksz9031 ravb Waiting for PHY auto negotiation to complete... done ravb: 1000Base/Full Using ravb device TFTP from server 192.168.20.20; our IP address is 192.168.20.93 Filename '/tftpboot/kurokawa/AGL/m3ulcb/initramfs-netboot-image-m3ulcb.ext4.gz'. Load address: 0x5c3f9520 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################## 3.4 MiB/s done Bytes transferred = 1958521 (1de279 hex) ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Using Device Tree in place at 0000000048000000, end 000000004801716f Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-yocto-standard (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Tue Sep 4 05:30:58 UTC 2018 [ 0.000000] Boot CPU: AArch64 Processor [411fd073] [ 0.000000] Machine model: Renesas M3ULCB Kingfisher board based on r8a7796 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node linux,adsp, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000058000000, size 384 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,multimedia, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000063fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x63ff7c300-0x63ff7ddff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000048000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff] [ 0.000000] node 0: [mem 0x0000000057000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000600000000-0x000000063fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000063fffffff] [ 0.000000] On node 0 totalpages: 479232 [ 0.000000] DMA zone: 3392 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 217088 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS resident on physical CPU 0x0 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 23 pages/cpu @ffff8005ffeef000 s55576 r8192 d30440 u94208 [ 0.000000] pcpu-alloc: s55576 r8192 d30440 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 471744 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttySC0,115200 ignore_loglevel video=HDMI-A-1:1920x1080-32@60 root=/dev/ram0 ramdisk_size=16384 ip=192.168.20.93 rw rootfstype=ext4 rootwait rootdelay=2 nbd.server=192.168.20.20 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0x4ffff000-0x53fff000] (64MB) mapped at [ffff80000ffff000-ffff800013ffefff] [ 0.000000] Memory: 1125900K/1916928K available (11196K kernel code, 1230K rwdata, 5276K rodata, 1152K init, 426K bss, 119284K reserved, 671744K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff000008b70000 ( 11200 KB) [ 0.000000] .rodata : 0xffff000008b70000 - 0xffff0000090a0000 ( 5312 KB) [ 0.000000] .init : 0xffff0000090a0000 - 0xffff0000091c0000 ( 1152 KB) [ 0.000000] .data : 0xffff0000091c0000 - 0xffff0000092f3a00 ( 1231 KB) [ 0.000000] .bss : 0xffff0000092f3a00 - 0xffff00000935e550 ( 427 KB) [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000200000 - 0xffff7e0018000000 ( 382 MB actual) [ 0.000000] memory : 0xffff800008000000 - 0xffff800600000000 ( 24448 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns [ 0.000493] Console: colour dummy device 80x25 [ 0.000538] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333) [ 0.000546] pid_max: default: 32768 minimum: 301 [ 0.000587] Security Framework initialized [ 0.000596] Smack: Initializing. [ 0.000599] Smack: IPv6 port labeling enabled. [ 0.001401] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001800] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001827] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.001843] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.015900] ASID allocator initialised with 65536 entries [ 0.023887] Hierarchical SRCU implementation. [ 0.032608] Detected Renesas R-Car Gen3 r8a7796 ES1.0 [ 0.033803] EFI services will not be available. [ 0.039918] smp: Bringing up secondary CPUs ... [ 0.068084] Detected PIPT I-cache on CPU1 [ 0.068124] CPU1: Booted secondary processor [411fd073] [ 0.096111] CPU features: enabling workaround for ARM erratum 845719 [ 0.096117] Detected VIPT I-cache on CPU2 [ 0.096156] CPU2: Booted secondary processor [410fd034] [ 0.124124] Detected VIPT I-cache on CPU3 [ 0.124145] CPU3: Booted secondary processor [410fd034] [ 0.152150] Detected VIPT I-cache on CPU4 [ 0.152171] CPU4: Booted secondary processor [410fd034] [ 0.180182] Detected VIPT I-cache on CPU5 [ 0.180202] CPU5: Booted secondary processor [410fd034] [ 0.180270] smp: Brought up 1 node, 6 CPUs [ 0.180288] SMP: Total of 6 processors activated. [ 0.180293] CPU features: detected feature: 32-bit EL0 Support [ 0.180470] CPU: All CPU(s) started at EL2 [ 0.180491] alternatives: patching kernel code [ 0.181050] devtmpfs: initialized [ 0.187162] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.187215] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 0.195214] pinctrl core: initialized pinctrl subsystem [ 0.197143] DMI not present or invalid. [ 0.197384] NET: Registered protocol family 16 [ 0.199069] cpuidle: using governor menu [ 0.200134] vdso: 2 pages (1 code @ ffff000008b76000, 1 data @ ffff0000091c5000) [ 0.200148] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.201008] DMA: preallocated 256 KiB pool for atomic allocations [ 0.201395] Serial: AMBA PL011 UART driver [ 0.205196] sh-pfc e6060000.pin-controller: r8a77960_pfc support registered [ 0.233702] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.235020] ACPI: Interpreter disabled. [ 0.238765] rcar-cpufreq: use avs value: 0 [ 0.238785] rcar-cpufreq: /cpus/cpu@0 is running with: /opp_table0 [ 0.238795] rcar-cpufreq: /cpus/cpu@1 is running with: /opp_table0 [ 0.240826] vgaarb: loaded [ 0.240990] SCSI subsystem initialized [ 0.241119] libata version 3.00 loaded. [ 0.241297] usbcore: registered new interface driver usbfs [ 0.241326] usbcore: registered new interface driver hub [ 0.241370] usbcore: registered new device driver usb [ 0.242361] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz [ 0.242781] media: Linux media interface: v0.10 [ 0.242801] Linux video capture interface: v2.00 [ 0.242871] pps_core: LinuxPPS API ver. 1 registered [ 0.242875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.242888] PTP clock support registered [ 0.243141] EDAC MC: Ver: 3.0.0 [ 0.243310] dmi: Firmware registration failed. [ 0.244209] Advanced Linux Sound Architecture Driver Initialized. [ 0.244447] NetLabel: Initializing [ 0.244453] NetLabel: domain hash size = 128 [ 0.244456] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.244495] NetLabel: unlabeled traffic allowed by default [ 0.245850] clocksource: Switched to clocksource arch_sys_counter [ 0.245959] VFS: Disk quotas dquot_6.6.0 [ 0.245996] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.246102] pnp: PnP ACPI: disabled [ 0.250820] NET: Registered protocol family 2 [ 0.251250] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.251324] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.251456] TCP: Hash tables configured (established 16384 bind 16384) [ 0.251567] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.251590] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.251703] NET: Registered protocol family 1 [ 0.251908] RPC: Registered named UNIX socket transport module. [ 0.251914] RPC: Registered udp transport module. [ 0.251918] RPC: Registered tcp transport module. [ 0.251923] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.251930] PCI: CLS 0 bytes, default 128 [ 0.252025] Trying to unpack rootfs image as initramfs... [ 0.252289] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.255894] BUG: Bad page state in process swapper/0 pfn:5c400 [ 0.255906] page:ffff7e0000710000 count:0 mapcount:-127 mapping: (null) index:0x4 [ 0.255913] flags: 0xfffc00000000000() [ 0.255921] raw: 0fffc00000000000 0000000000000000 0000000000000004 00000000ffffff80 [ 0.255926] raw: dead000000000100 dead000000000200 000000000000000a 0000000000000000 [ 0.255929] page dumped because: nonzero mapcount [ 0.255932] Modules linked in: [ 0.255941] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-yocto-standard #1 [ 0.255945] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 0.255949] Call trace: [ 0.255963] [] dump_backtrace+0x0/0x378 [ 0.255968] [] show_stack+0x14/0x20 [ 0.255977] [] dump_stack+0x9c/0xbc [ 0.255985] [] bad_page+0xe8/0x150 [ 0.255990] [] free_pages_check_bad+0x6c/0xa8 [ 0.255994] [] free_pcppages_bulk+0x478/0x508 [ 0.256000] [] free_hot_cold_page+0x1e4/0x228 [ 0.256005] [] __free_pages+0x40/0x48 [ 0.256010] [] free_reserved_area+0x7c/0x118 [ 0.256018] [] free_initrd_mem+0x20/0x2c [ 0.256022] [] free_initrd+0xa0/0xb8 [ 0.256027] [] populate_rootfs+0xf4/0x114 [ 0.256031] [] do_one_initcall+0x38/0x128 [ 0.256036] [] kernel_init_freeable+0x188/0x22c [ 0.256041] [] kernel_init+0x10/0x100 [ 0.256046] [] ret_from_fork+0x10/0x18 [ 0.256050] Disabling lock debugging due to kernel taint [ 0.257918] Freeing initrd memory: 3732K [ 0.258630] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available [ 0.258875] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.259242] kvm [1]: 8-bit VMID [ 0.259248] kvm [1]: IDMAP page: 48b57000 [ 0.259251] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 0.259980] kvm [1]: vgic-v2@f1040000 [ 0.260068] kvm [1]: vgic interrupt IRQ1 [ 0.260077] kvm [1]: virtual timer IRQ4 [ 0.260167] kvm [1]: Hyp mode initialized successfully [ 0.262531] audit: initializing netlink subsys (disabled) [ 0.262631] audit: type=2000 audit(0.259:1): state=initialized audit_enabled=0 res=1 [ 0.262893] workingset: timestamp_bits=44 max_order=19 bucket_order=0 [ 0.266626] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.266997] NFS: Registering the id_resolver key type [ 0.267019] Key type id_resolver registered [ 0.267023] Key type id_legacy registered [ 0.267031] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.267154] 9p: Installing v9fs 9p2000 file system support [ 0.268582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.268591] io scheduler noop registered [ 0.268689] io scheduler cfq registered (default) [ 0.268693] io scheduler mq-deadline registered [ 0.268697] io scheduler kyber registered [ 0.274974] gpio_rcar e6050000.gpio: driving 16 GPIOs [ 0.275303] gpio_rcar e6051000.gpio: driving 29 GPIOs [ 0.275433] GPIO line 455 (BL PWM 100%) hogged as output/high [ 0.275557] gpio_rcar e6052000.gpio: driving 15 GPIOs [ 0.275776] gpio_rcar e6053000.gpio: driving 16 GPIOs [ 0.275886] GPIO line 432 (MOST RST) hogged as output/high [ 0.275997] gpio_rcar e6054000.gpio: driving 18 GPIOs [ 0.276190] gpio_rcar e6055000.gpio: driving 26 GPIOs [ 0.276298] GPIO line 381 (Onboard MCh Audio) hogged as output/high [ 0.276412] gpio_rcar e6055400.gpio: driving 32 GPIOs [ 0.276630] gpio_rcar e6055800.gpio: driving 4 GPIOs [ 0.278054] rcar-pcie fe000000.pcie: no pcie3v3 regulator found [ 0.278063] rcar-pcie fe000000.pcie: no pcie1v8 regulator found [ 0.278070] OF: PCI: host bridge /soc/pcie@fe000000 ranges: [ 0.278085] OF: PCI: IO 0xfe100000..0xfe1fffff -> 0x00000000 [ 0.278096] OF: PCI: MEM 0xfe200000..0xfe3fffff -> 0xfe200000 [ 0.278104] OF: PCI: MEM 0x30000000..0x37ffffff -> 0x30000000 [ 0.278110] OF: PCI: MEM 0x38000000..0x3fffffff -> 0x38000000 [ 0.328224] rcar-pcie fe000000.pcie: PCIe link down [ 0.347960] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.349803] SuperH (H)SCI(F) driver initialized [ 0.350237] e6540000.serial: ttySC1 at MMIO 0xe6540000 (irq = 57, base_baud = 0) is a hscif [ 0.351012] e6550000.serial: ttySC3 at MMIO 0xe6550000 (irq = 58, base_baud = 0) is a hscif [ 0.351474] e6e68000.serial: ttySC2 at MMIO 0xe6e68000 (irq = 59, base_baud = 0) is a scif [ 0.351941] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 68, base_baud = 0) is a scif [ 1.673292] console [ttySC0] enabled [ 1.677774] msm_serial: driver initialized [ 1.683366] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.689989] [drm] No driver support for vblank timestamp query. [ 1.696623] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY) [ 1.706479] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.721383] brd: module loaded [ 1.728681] loop: module loaded [ 1.744915] libphy: Fixed MDIO Bus: probed [ 1.749199] tun: Universal TUN/TAP device driver, 1.6 [ 1.755444] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.761285] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.767236] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.774220] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.779815] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 1.787642] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.793950] sky2: driver version 1.30 [ 1.798531] libphy: ravb_mii: probed [ 1.803062] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 2e:09:0a:01:98:ae, IRQ 54. [ 1.812517] VFIO - User Level meta-driver version: 0.3 [ 1.818934] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.825486] ehci-pci: EHCI PCI platform driver [ 1.829962] ehci-platform: EHCI generic platform driver [ 1.835649] ehci-platform ee080100.usb: EHCI Host Controller [ 1.841328] ehci-platform ee080100.usb: new USB bus registered, assigned bus number 1 [ 1.849285] ehci-platform ee080100.usb: irq 157, io mem 0xee080100 [ 1.869345] ehci-platform ee080100.usb: USB 2.0 started, EHCI 1.10 [ 1.875890] hub 1-0:1.0: USB hub found [ 1.879658] hub 1-0:1.0: 1 port detected [ 1.884005] ehci-platform ee0a0100.usb: EHCI Host Controller [ 1.889680] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 2 [ 1.897635] ehci-platform ee0a0100.usb: irq 158, io mem 0xee0a0100 [ 1.917346] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10 [ 1.923825] hub 2-0:1.0: USB hub found [ 1.927594] hub 2-0:1.0: 1 port detected [ 1.931864] ehci-orion: EHCI orion driver [ 1.936129] ehci-exynos: EHCI EXYNOS driver [ 1.940445] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 1.946113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.952306] ohci-pci: OHCI PCI platform driver [ 1.956806] ohci-platform: OHCI generic platform driver [ 1.962310] ohci-platform ee080000.usb: Generic Platform OHCI controller [ 1.969022] ohci-platform ee080000.usb: new USB bus registered, assigned bus number 3 [ 1.976942] ohci-platform ee080000.usb: irq 157, io mem 0xee080000 [ 2.071649] hub 3-0:1.0: USB hub found [ 2.075421] hub 3-0:1.0: 1 port detected [ 2.079714] ohci-platform ee0a0000.usb: Generic Platform OHCI controller [ 2.086427] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 4 [ 2.094359] ohci-platform ee0a0000.usb: irq 158, io mem 0xee0a0000 [ 2.187649] hub 4-0:1.0: USB hub found [ 2.191415] hub 4-0:1.0: 1 port detected [ 2.195659] ohci-exynos: OHCI EXYNOS driver [ 2.200619] usbcore: registered new interface driver usb-storage [ 2.206689] usbcore: registered new interface driver usbserial [ 2.212548] usbcore: registered new interface driver usbserial_generic [ 2.219091] usbserial: USB Serial support registered for generic [ 2.226591] renesas_usbhs e6590000.usb: no transceiver found [ 2.232334] renesas_usbhs e6590000.usb: gadget probed [ 2.237489] renesas_usbhs e6590000.usb: probed [ 2.243944] i2c /dev entries driver [ 2.255029] cs2000-cp 2-004f: revision - C1 [ 2.259389] pca953x 2-0074: 2-0074 supply vcc not found, using dummy regulator [ 2.269349] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 2.275499] GPIO line 346 (HUB pwen) hogged as output/high [ 2.276507] GPIO line 347 (HUB rst) hogged as output/high [ 2.277516] GPIO line 348 (OTG off VBUSn) hogged as output/low [ 2.278523] GPIO line 349 (OTG EXTLPn) hogged as output/high [ 2.282047] pca953x 2-0075: 2-0075 supply vcc not found, using dummy regulator [ 2.293706] GPIO line 330 (GPS rst) hogged as output/high [ 2.294714] GPIO line 333 (FPDLink shdn) hogged as output/high [ 2.299697] i2c-rcar e6510000.i2c: probed [ 2.305233] pca953x 4-0076: 4-0076 supply vcc not found, using dummy regulator [ 2.307802] GPIO line 308 (Video-B A0) hogged as output/low [ 2.308095] GPIO line 309 (Video-B A1) hogged as output/high [ 2.308387] GPIO line 310 (Video-A A0) hogged as output/low [ 2.308680] GPIO line 311 (Video-A A1) hogged as output/high [ 2.308973] GPIO line 316 (CMOS PWDN) hogged as output/high [ 2.309265] GPIO line 317 (CMOS RST) hogged as output/high [ 2.309559] GPIO line 318 (RaspB_IO1) hogged as output/high [ 2.309852] GPIO line 319 (RaspB_IO0) hogged as output/high [ 2.310145] GPIO line 312 (SAM RST) hogged as output/high [ 2.310437] GPIO line 313 (SAM PWR) hogged as output/low [ 2.310729] GPIO line 322 (LVDS switch) hogged as output/high [ 2.311365] pca953x 4-0077: 4-0077 supply vcc not found, using dummy regulator [ 2.313911] GPIO line 292 (mPCIe WAKE#) hogged as output/low [ 2.314204] GPIO line 293 (mPCIe W_DISABLE) hogged as output/high [ 2.314410] GPIO line 294 (mPCIe CLKREQ#) hogged as input [ 2.314616] GPIO line 295 (mPCIe OVC) hogged as input [ 2.315186] i2c-rcar e66d8000.i2c: probed [ 2.316023] usbcore: registered new interface driver i2c-tiny-usb [ 2.316888] i2c i2c-2: Added multiplexed i2c bus 9 [ 2.317056] i2c i2c-2: Added multiplexed i2c bus 10 [ 2.317221] i2c i2c-2: Added multiplexed i2c bus 11 [ 2.317406] i2c i2c-2: Added multiplexed i2c bus 12 [ 2.317701] adv7511 13-003d: 13-003d supply avdd not found, using dummy regulator [ 2.317731] adv7511 13-003d: 13-003d supply dvdd not found, using dummy regulator [ 2.317767] adv7511 13-003d: 13-003d supply pvdd not found, using dummy regulator [ 2.317785] adv7511 13-003d: 13-003d supply bgvdd not found, using dummy regulator [ 2.317802] adv7511 13-003d: 13-003d supply dvdd-3v not found, using dummy regulator [ 2.338232] i2c i2c-2: Added multiplexed i2c bus 13 [ 2.338414] i2c i2c-2: Added multiplexed i2c bus 14 [ 2.339297] edt_ft5x06 15-0038: touchscreen probe failed [ 2.339336] i2c i2c-2: Added multiplexed i2c bus 15 [ 2.339782] i2c i2c-2: Added multiplexed i2c bus 16 [ 2.339786] pca954x 2-0071: registered 8 multiplexed busses for I2C switch pca9548 [ 2.340196] i2c i2c-4: Added multiplexed i2c bus 17 [ 2.340850] i2c i2c-4: Added multiplexed i2c bus 18 [ 2.341009] i2c i2c-4: Added multiplexed i2c bus 19 [ 2.341113] i2c i2c-4: Added multiplexed i2c bus 20 [ 2.341299] i2c i2c-4: Added multiplexed i2c bus 21 [ 2.341480] i2c i2c-4: Added multiplexed i2c bus 22 [ 2.341582] i2c i2c-4: Added multiplexed i2c bus 23 [ 2.341785] pca953x 24-0026: 24-0026 supply vcc not found, using dummy regulator [ 2.342005] pca953x 24-0026: failed reading register [ 2.342423] dummy 24-006c: failed reading [ 2.342518] i2c i2c-4: Added multiplexed i2c bus 24 [ 2.342523] pca954x 4-0071: registered 8 multiplexed busses for I2C switch pca9548 [ 2.342984] ov5642 22-003c: reg_write: i2c write error, reg: 3103 [ 2.343249] ov5647_read: i2c read error, reg: 100 [ 2.343251] ov5647 21-0036: Camera not available, check power [ 2.343424] ov5647_read: i2c read error, reg: 300a [ 2.343426] ov5647 21-0036: OV5647 not found! [ 2.594227] ov106xx 18-0060: deserializer does not present for OV10635 [ 2.594276] ov106xx 18-0060: deserializer does not present for OV490 [ 2.594322] ov106xx 18-0060: deserializer does not present for OV495 [ 2.594360] ov106xx 18-0060: deserializer does not present for AR0132 [ 2.594396] ov106xx 18-0060: deserializer does not present [ 2.594431] ov106xx 18-0060: deserializer does not present for AP0101 [ 2.594464] ov106xx 18-0060: deserializer does not present [ 2.594469] ov106xx 18-0060: failed to probe @ 0x60 (i2c-4-mux (chan_id 1)) [ 2.594477] ov106xx: probe of 18-0060 failed with error -22 [ 2.594543] ov106xx 18-0061: deserializer does not present for OV10635 [ 2.594582] ov106xx 18-0061: deserializer does not present for OV490 [ 2.594617] ov106xx 18-0061: deserializer does not present for OV495 [ 2.594652] ov106xx 18-0061: deserializer does not present for AR0132 [ 2.594685] ov106xx 18-0061: deserializer does not present [ 2.594718] ov106xx 18-0061: deserializer does not present for AP0101 [ 2.594750] ov106xx 18-0061: deserializer does not present [ 2.594755] ov106xx 18-0061: failed to probe @ 0x61 (i2c-4-mux (chan_id 1)) [ 2.594759] ov106xx: probe of 18-0061 failed with error -22 [ 2.594818] ov106xx 18-0062: deserializer does not present for OV10635 [ 2.594856] ov106xx 18-0062: deserializer does not present for OV490 [ 2.594890] ov106xx 18-0062: deserializer does not present for OV495 [ 2.594925] ov106xx 18-0062: deserializer does not present for AR0132 [ 2.594959] ov106xx 18-0062: deserializer does not present [ 2.594992] ov106xx 18-0062: deserializer does not present for AP0101 [ 2.595025] ov106xx 18-0062: deserializer does not present [ 2.595029] ov106xx 18-0062: failed to probe @ 0x62 (i2c-4-mux (chan_id 1)) [ 2.595034] ov106xx: probe of 18-0062 failed with error -22 [ 2.595096] ov106xx 18-0063: deserializer does not present for OV10635 [ 2.595134] ov106xx 18-0063: deserializer does not present for OV490 [ 2.595168] ov106xx 18-0063: deserializer does not present for OV495 [ 2.595204] ov106xx 18-0063: deserializer does not present for AR0132 [ 2.595237] ov106xx 18-0063: deserializer does not present [ 2.595270] ov106xx 18-0063: deserializer does not present for AP0101 [ 2.595304] ov106xx 18-0063: deserializer does not present [ 2.595308] ov106xx 18-0063: failed to probe @ 0x63 (i2c-4-mux (chan_id 1)) [ 2.595313] ov106xx: probe of 18-0063 failed with error -22 [ 2.595908] rcar_csi2 fea80000.csi2: Data lanes 2, link freq 280 [ 2.596062] rcar_csi2 feaa0000.csi2: Data lanes 4, link freq 300 [ 2.601494] imr fe860000.imr-lx4: IMR device (pdev: -1) registered as /dev/video0 [ 2.601718] imr fe870000.imr-lx4: IMR device (pdev: -1) registered as /dev/video1 [ 2.606129] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values [ 2.610888] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points [ 2.615336] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points [ 2.619638] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points [ 2.644986] sdhci: Secure Digital Host Controller Interface driver [ 2.644988] sdhci: Copyright(c) Pierre Ossman [ 2.645492] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO [ 2.701445] renesas_sdhi_internal_dmac ee140000.sd: mmc0 base at 0xee140000 max clock rate 200 MHz [ 2.702215] Synopsys Designware Multimedia Card Interface Driver [ 2.703194] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.705832] ledtrig-cpu: registered to indicate activity on CPUs [ 2.707026] usbcore: registered new interface driver usbhid [ 2.707028] usbhid: USB HID core driver [ 2.711689] lsm9ds0 16-001d: Accelerometer and magnetometer found. [ 2.716486] lsm9ds0 16-006b: Gyroscope found. [ 2.718470] optee: probing for conduit method from DT. [ 2.718695] R-Car Rev.1.0.8 [ 2.719122] optee: initialized driver [ 2.720595] usbcore: registered new interface driver snd-usb-audio [ 2.721876] pcm3168a 16-0044: Failed to get supply 'VDD1': -517 [ 2.735455] rcar_sound ec500000.sound: probed [ 2.735785] NET: Registered protocol family 17 [ 2.735837] 9pnet: Installing 9P2000 support [ 2.735884] Key type dns_resolver registered [ 2.736538] registered taskstats version 1 [ 2.743687] thermal emergency: set temperature to 110 celsius [ 2.743779] thermal emergency: shutdown target cpus 1-5 [ 2.743781] thermal emergency: freq scaled target cpus 0 [ 2.744201] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs [ 2.820290] mmc0: new HS400 MMC card at address 0001 [ 2.820511] mmcblk0: mmc0:0001 R1J55A 7.28 GiB [ 2.820592] mmcblk0boot0: mmc0:0001 R1J55A partition 1 8.00 MiB [ 2.820681] mmcblk0boot1: mmc0:0001 R1J55A partition 2 8.00 MiB [ 2.820768] mmcblk0rpmb: mmc0:0001 R1J55A partition 3 4.00 MiB, chardev (237:0) [ 2.957365] OF: PCI: host bridge /soc/pcie@ee800000 ranges: [ 2.957395] OF: PCI: IO 0xee900000..0xee9fffff -> 0x00000000 [ 2.957408] OF: PCI: MEM 0xeea00000..0xeebfffff -> 0xeea00000 [ 2.957421] OF: PCI: MEM 0xc0000000..0xc7ffffff -> 0xc0000000 [ 2.957427] OF: PCI: MEM 0xc8000000..0xcfffffff -> 0xc8000000 [ 3.007622] rcar-pcie ee800000.pcie: PCIe link down [ 3.010426] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.010429] [drm] No driver support for vblank timestamp query. [ 3.170615] Console: switching to colour frame buffer device 160x50 [ 3.194535] rcar-du feb00000.display: fb0: frame buffer device [ 3.200931] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0 [ 3.208681] [drm] Device feb00000.display probed [ 3.214519] bd9571mwv 7-0030: Device: BD9571MWV rev. 1 [ 3.226947] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO [ 3.271620] hub 2-1:1.0: USB hub found [ 3.275627] hub 2-1:1.0: 4 ports detected [ 3.293600] renesas_sdhi_internal_dmac ee100000.sd: mmc1 base at 0xee100000 max clock rate 200 MHz [ 3.365459] renesas_sdhi_internal_dmac ee160000.sd: mmc2 base at 0xee160000 max clock rate 26 MHz [ 3.384453] renesas_sdhi_internal_dmac ee160000.sd: card claims to support voltages below defined range [ 3.408894] mmc2: new high speed SDIO card at address 0001 [ 3.469705] asoc-simple-card sound@0: pcm3168a <-> rsnd-dai.0 mapping ok [ 3.476473] asoc-simple-card sound@0: ASoC: no DMI vendor name! [ 3.487153] asoc-simple-card sound@1: ak4613-hifi <-> rsnd-dai.1 mapping ok [ 3.494143] asoc-simple-card sound@1: ASoC: no DMI vendor name! [ 3.505800] asoc-simple-card sound@2: si468x-pcm <-> rsnd-dai.2 mapping ok [ 3.512701] asoc-simple-card sound@2: ASoC: no DMI vendor name! [ 3.521422] asoc-simple-card sound@3: wl18xx-pcm <-> rsnd-dai.3 mapping ok [ 3.528329] asoc-simple-card sound@3: ASoC: no DMI vendor name! [ 3.535751] input: keyboard as /devices/platform/keyboard/input/input1 [ 3.542577] hctosys: unable to open rtc device (rtc0) [ 3.585350] usb 2-1.2: new full-speed USB device number 3 using ehci-platform [ 3.588677] mmc1: new ultra high speed SDR104 SDHC card at address aaaa [ 3.592552] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 3.603156] mmcblk1: p1 [ 3.624470] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=194) [ 3.752739] input: ILITEK Multi-Touch-V5100 as /devices/platform/soc/ee0a0100.usb/usb2/2-1/2-1.2/2-1.2:1.0/0003:222A:011E.0001/input/input2 [ 3.765378] hid-multitouch 0003:222A:011E.0001: input: USB HID v1.10 Device [ILITEK Multi-Touch-V5100] on usb-ee0a0100.usb-1.2/input0 [ 3.778431] hid-generic 0003:222A:011E.0002: device has no listeners, quitting [ 7.298441] ravb e6800000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 7.329355] IP-Config: Guessing netmask 255.255.255.0 [ 7.334406] IP-Config: Complete: [ 7.337634] device=eth0, hwaddr=2e:09:0a:01:98:ae, ipaddr=192.168.20.93, mask=255.255.255.0, gw=255.255.255.255 [ 7.348152] host=192.168.20.93, domain=, nis-domain=(none) [ 7.354069] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 7.361976] SDHI3 VccQ: disabling [ 7.365288] wlan-en-regulator: disabling [ 7.369214] SDHI3 Vcc: disabling [ 7.372442] codec-en-regulator: disabling [ 7.376451] amp-en-regulator: disabling [ 7.380296] ALSA device list: [ 7.383263] #0: Loopback 1 [ 7.386141] #1: pcm3168a [ 7.388841] #2: ak4613 [ 7.391372] #3: radio [ 7.393815] #4: wl18xx [ 7.396648] Waiting 2 sec before mounting root device... [ 9.409377] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 9.417095] RAMDISK: gzip image found at block 0 [ 9.501468] EXT4-fs (ram0): mounted filesystem with ordered data mode. Opts: (null) [ 9.509158] VFS: Mounted root (ext4 filesystem) on device 1:0. [ 9.515071] devtmpfs: mounted [ 9.518643] Freeing unused kernel memory: 1152K ________________________________________________________________________________ ___ ________ _ __ __ __ __ / | / ____/ / / | / /__ / /_/ /_ ____ ____ / /_ / /| |/ / __/ / ______ / |/ / _ \/ __/ __ \/ __ \/ __ \/ __/ / ___ / /_/ / /___ /_____/ / /| / __/ /_/ /_/ / /_/ / /_/ / /_ /_/ |_\____/_____/ /_/ |_/\___/\__/_.___/\____/\____/\__/ ________________________________________________________________________________ /sbin/init[1]: starting initrd script /sbin/init[1]: mounting FS: proc /proc /sbin/init[1]: mounting FS: sysfs /sys /sbin/init[1]: mounting F[ 9.588581] nbd0: detected capacity change from 0 to 2258247680 S: devtmpfs /dev /sbin/[ 9.596717] EXT4-fs (nbd0): couldn't mount as ext3 due to feature incompatibilities init[1]: /dev (devtmpfs) already mounted /sbin/init[1]: mounting FS: devpts /dev/pts /sbin/init[1]: mounting FS: tmpfs /dev/shm /sbin/init[1]: mounting FS: tmpfs /tmp /sbin/init[1]: mounting FS: tmpfs /run /sbin/init[1]: NBD parameters: device /dev/nbd0, server 192.168.20.20:10809 /sbin/init[1]: mounting FS: smackfs /sys/fs/smackfs /sbin/init[1]: Starting NBD client /sbin/init[1]: NBD client successfully started [ 9.683437] EXT4-fs (nbd0): recovery complete [ 9.688046] EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) /sbin/init[1]: Moving /dev to new rootfs /sbin/init[1]: Moving /proc to new rootfs /sbin/init[1]: Moving /sys to new rootfs /sbin/init[1]: Moving /tmp to new rootfs /sbin/init[1]: Moving /run to new rootfs /sbin/init[1]: Switching to new rootfs /sbin/init[1]: Adjusting Connman configuration /sbin/init: line 133: can't create /etc/resolv.conf: nonexistent directory /sbin/init[1]: Exec'ing systemd ________________________________________________________________________________ ___ ________ ____ __ _ / | / ____/ / / __ )____ ____ / /_(_)___ ____ _ / /| |/ / __/ / / __ / __ \/ __ \/ __/ / __ \/ __ `/ / ___ / /_/ / /___ / /_/ / /_/ / /_/ / /_/ / / / / /_/ / _ _ _ /_/ |_\____/_____/ /_____/\____/\____/\__/_/_/ /_/\__, / (_) (_) (_) _____________________________________________________/____/_____________________ [ 9.842877] systemd[1]: Successfully loaded Smack policies. [ 9.850089] systemd[1]: Successfully loaded Smack/CIPSO policies. [ 9.857075] systemd[1]: System time before build time, advancing clock. [ 9.883533] NET: Registered protocol family 10 [ 9.888656] Segment Routing with IPv6 [ 9.897014] systemd[1]: Relabelled /dev and /run in 2.982ms. [ 9.911603] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid) [ 9.932663] systemd[1]: Detected architecture arm64. Welcome to Automotive Grade Linux 5.99.5 (flounder)! [ 9.953925] systemd[1]: Set hostname to . [ 10.103025] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 10.125609] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 10.146378] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 10.165634] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 10.185906] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 10.205517] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 10.225519] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Process Core Dump Socket. Mounting POSIX Message Queue File System... [ OK ] Listening on udev Kernel Socket. Mounting Huge Pages File System... [ OK ] Reached target Remote File Systems. [ OK ] Listening on Journal Socket. Starting Load Kernel Modules... Starting Setup Virtual Console... [ 10.347564] mostcore: loading out-of-tree module taints kernel. [ 10.354181] mostcore: init() Starting[ 10.360712] aim_cdev: init() Remount Root an[ 10.364825] mostcore: registered new application interfacing module cdev d Kernel File Systems...[ 10.374079] EXT4-fs (nbd0): re-mounted. Opts: (null) [ 10.379831] mostcore: registered new application interfacing module networking [ 10.382546] aim_sound: init() [ 10.382586] mostcore: registered new application interfacing module sound [ 10.385706] mostcore: registered new application interfacing module v4l [ 10.393603] usbcore: registered new interface driver hdm_usb [ 10.396688] rgnmm_drv mmngr: assigned reserved memory node linux,multimedia Starting Create list of required stcce nodes for the current kernel... [ OK ] Created slice User and Session Slice. Mounting Kernel Debug File System... [ OK ] Created slice system-afm\x2duser\x2dsession.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Slices. [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Created slice system-getty.slice. [ OK ] Listening on udev Control Socket. [ OK ] Reached target Swap. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Huge Pages File System. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required stacvice nodes for the current kernel. Starting Rebuild Hardware Database... Starting Create System Users... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Create System Users. [ OK ] Started Apply Kernel Variables. [ 10.868679] systemd-journald[2317]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Started udev Kernel Device Manager. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... [ OK ] Started Load/Save Random Seed. [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Rebuild Dynamic Linker Cache. Starting Update UTMP about System Boot/Shutdown... Starting Setup Virtual Console... [ OK ] Started Setup Virtual Console. [ OK ] Started Update UTMP about System Boot/Shutdown. [ 11.514256] random: crng init done [ OK ] Started Rebuild Hardware Database. Starting Update is Completed... Starting udev Coldplug all Devices... [ OK ] Started Update is Completed. [ OK ] Started udev Coldplug all Devices. [ 12.042502] (stk) :sysfs entries created [ 12.044291] Bluetooth: Core ver 2.22 [ 12.044382] NET: Registered protocol family 31 [ 12.044384] Bluetooth: HCI device and connection manager initialized [ 12.044405] Bluetooth: HCI socket layer initialized [ 12.044414] Bluetooth: L2CAP socket layer initialized [ 12.044439] Bluetooth: SCO socket layer initialized Starting Setup Virtual [ 12.110472] (stc): chnl_id list empty :4 Console... [ OK ] Reached target System Initialization. Starting cynara-monitor-get.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on GPS (Global Positioning[ 12.110477] (stk) : st_kim_start System) Daemon [ 12.182059] CAN device driver interface Sockets. [ OK ] Listening on afm-sys[ 12.205052] rcar_can e6c30000.can: device registered (IRQ30) tem-daemon.socket. [ 12.214133] rcar_can e6c38000.can: device registered (IRQ31) [ OK ] Started dnf makecache timer. [ OK ] Listening on security-manager.socket. [ OK ] Started dnf-automatic-download timer. Starting sshd.socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on[ 12.222160] (stk) :ldisc_install = 1 Avahi mDNS/DNS-SD Stack Activation Socket. [ 12.305052] pvrsrvkm fd000000.gsx: opp[1/4]: (200000000 Hz, 830000 uV) [ 12.326016] pvrsrvkm fd000000.gsx: opp[2/4]: (300000000 Hz, 830000 uV) [ 12.332782] pvrsrvkm fd000000.gsx: opp[3/4]: (400000000 Hz, 830000 uV) [ 12.340115] pvrsrvkm fd000000.gsx: opp[4/4]: (600000000 Hz, 830000 uV) [ 12.351751] [drm] Initialized pvr 1.9.4991288 20110701 for fd000000.gsx on minor 1 [ OK ] Listening on cynara-admin.socket. [ OK ] Started dnf-automatic-notifyonly timer. Starting cynara-agent.socket. Starting Network Service... [ OK ] Listening on cynara.socket. [ OK ] Started dnf-automatic-install timer. [ OK ] Reached target Timers. [ OK ] Started Setup Virtual Console. [ OK ] Listening on cynara-monitor-get.socket. [ OK ] Listening on sshd.socket. [ OK ] Listening on cynara-agent.socket. [ OK ] Found device /dev/ttySC0. [ 12.629954] wl18xx_driver wl18xx.4.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2 [ 12.640713] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2 [ 12.650198] wlcore: WARNING falling back to default config [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Telephony service... Starting PowerVR consumer services... Starting Save/Restore Sound Card State... [ OK ] Reached target Containers. Starting Driver configuration for Unicens2... [ OK ] Started System Logging Service. Starting Login Service... Starting Modem Manager... Starting Initiate afm-system-setup... Starting neard service... [ OK ] Started D-Bus System Message Bus. [ 12.967619] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 12.977489] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead. [ 12.977489] [ 12.987769] wlcore: WARNING This default nvs file can be removed from the file system [ 12.987769] [ 13.006336] wlcore: loaded [ OK ] Started Telephony service. [ 13.047137] nfc: nfc_init: NFC Core ver 0.1 [ 13.052556] NET: Registered protocol family 39 [ OK ] Started neard service. Starting Connection service... [ OK ] Started Kernel Logging Service. Starting Avahi mDNS/DNS-SD Stack... Starting User Mode Init Manager for TI shared transport... Starting Disk Manager (legacy version)... Starting Start the security manager... Starting Cynara service... [ OK ] Reached target cynara sockets. Starting Start Psplash Boot Screen... [ OK ] Started Network Service. [ 13.249357] (stk) :ldisc installation timeout [ OK ] Started Start the security manager. [ OK ] Started Cynara service. [ OK ] Started PowerVR consumer services. [ OK ] Started Save/Restore Sound Card State. [FAILED] Failed to start Driver configuration for Unicens2. See 'systemctl status unicens-config.service' for details. [ OK ] Started User Mode Init Manager for TI shared transport. [ OK ] Started Start Psplash Boot Screen. [ OK ] Started Connection service. [ OK ] Started Initiate afm-system-setup. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Disk Manager (legacy version). [ OK ] Started Login Service. Starting Hostname Service... Starting WPA supplicant... [ OK ] Started Automount Disk Manager. [ OK ] Started Application Framework Master, system side. [ OK ] Started Application Framework Supervisor. Starting Authorization Manager... Starting Load/Save RF Kill Switch Status... Starting Terminate Psplash Boot Screen... Starting Bluetooth service... [ OK ] Reached target Sound Card. [ OK ] Started Weston Wayland compositor. [ 13.249362] (stk) :ldisc_install = 0 [ 13.702084] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.712180] Bluetooth: BNEP filters: protocol multicast [ 13.712196] Bluetooth: BNEP socket layer initialized [ OK ] Started Terminate Psplash Boot Screen. [ OK ] Started WPA supplicant. [ OK ] Started Hostname Service. [ OK ] Started Bluetooth service. [ OK ] Started Authorization Manager. [ OK ] Started Bluetooth Audio ALSA Backend. [ OK ] Reached target Bluetooth. [ OK ] Reached target Network. Starting Permit User Sessions... Starting Target Communication Framework agent... Starting Berkeley Internet Name Domain (DNS)... [ OK ] Started Permit User Sessions. [ OK ] Started Modem Manager. [ OK ] Started Initiate afm-user-session 0. [ OK ] Started Serial Getty on ttySC0. [ OK ] Reached target Login Prompts[ 14.006225] audit: type=1006 audit(1536037243.147:2): pid=4122 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 . [ OK ] Created slice User Slice of root. Starting User Manager for UID 0... [ 14.080526] audit: type=1006 audit(1536037243.219:3): pid=4133 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1 [ 14.086648] wlcore: PHY firmware version: Rev 8.2.0.0.236 [ 14.099560] audit: type=1400 audit(1536037243.219:4): lsm=SMACK fn=smack_key_permission action=denied subject="System" object="_" requested=w pid=4133 comm="(systemd)" key_serial=923282549 key_desc="_uid.0" [ 14.118044] audit: type=1300 audit(1536037243.219:4): arch=c00000b7 syscall=219 success=no exit=-13 a0=8 a1=fffffffc a2=fffffffd a3=0 items=0 ppid=1 pid=4133 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="(systemd)" exe="/lib/systemd/systemd" subj=System key=(null) [ 14.145044] audit: type=1327 audit(1536037243.219:4): proctitle="(systemd)" [ OK ] Started Session 1 of user root. [ 14.266865] wlcore: firmware booted (Rev 8.9.0.0.69) [ OK ] Started User Manager for UID 0. [ 14.273361] (stk) : timed out waiting for ldisc to be un-installed [ 14.382073] (stk) :ldisc_install = 1 [ 14.384149] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ OK ] Started Target Communication Framework agent. [ 14.431861] audit: type=1400 audit(1536037243.571:5): lsm=SMACK fn=smack_inode_permission action=denied subject="System" object="_" requested=w pid=4124 comm="named" name="bind" dev="nbd0" ino=4732 [ 14.450359] audit: type=1300 audit(1536037243.571:5): arch=c00000b7 syscall=48 success=no exit=-13 a0=ffffffffffffff9c a1=aaaacc56c808 a2=2 a3=aaaacc56c808 items=0 ppid=4121 pid=4124 auid=4294967295 uid=987 gid=987 euid=987 suid=987 fsuid=987 egid=987 sgid=987 fsgid=987 tty=(none) ses=4294967295 comm="named" exe="/usr/sbin/named" subj=System key=(null) [ 14.481720] audit: type=1327 audit(1536037243.571:5): proctitle=2F7573722F7362696E2F6E616D6564002D750062696E64 [ 14.549775] (stc): st_tty_open [ OK ] Started Berkeley Internet Name Domain (DNS). [ 14.549813] (stk) :line discipline installed [ 14.577406] (stk) :ti-connectivity/TIInit_11.8.32.bts [ 14.583474] (stk) :change remote baud rate command in firmware [ OK ] Created slice system-afm\x2dapi\x2dunicens.slice. [ OK ] Created slice system-afm\x2dapi\x2dnfc.slice. [ OK ] Created slice system-afm\x2dapi\x2dBluetooth\x2dManager.slice. [ OK ] Created slice system-afm\x2dapi\x2dweather.slice. [ OK ] Created slice system-afm\x2dapi\x2dnetwork\x2dmanager.slice. [ OK ] Created slice system-afm\x2dapi\x2dpersistence.slice. [ OK ] Created slice system-afm\x2duser\x2dsetup.slice. Starting Initiate afm-user-setup 0... [ OK ] Created slice system-afm\x2dapi\x2dhomescreen.slice. [ OK ] Created slice system-afm\x2dapi\x2dwindowmanager.slice. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. [ OK ] Started Initiate afm-user-setup 0. [ OK ] Listening on Provides websocket api low-can for user 0. Starting Expose CAN Low Level APIs through AGL Framework... [ OK ] Listening on Provides websocket api homescreen for user 0. Starting HomeScreen Binding service... Starting Provides api homescreen for user 0... [ OK ] Listening on Provides websocket api nfc for user 0. Starting Binding for handling NFC access controls... [ OK ] Listening on Provides websocket api persistence for user 0. Starting /mnt/4995bda9-20d8-475c-98c+gitAUTOINC+3f1e9c8e1f-r0/build... [ OK ] Listening on Provides websocket api windowmanager for user 0. Starting Provides api windowmanager for user 0... Starting Window Manager... [ OK ] Listening on Provides websocket api weather for user 0. [ OK ] Listening on Provides websocket api unicens for user 0. Starting UNICENS V2 - Infotainment network setup and access... Starting Provides api unicens for user 0... [ OK ] Listening on Provides websocket api ahl-4a for user 0. [ OK ] Listening on Provides websocket api identity for user 0. Starting Provides api weather for user 0... [ OK ] Listening on Provides websocket api geoclue for user 0. Starting Binding for GeoClue interface... Starting Provides api persistence for user 0... Starting Provides api nfc for user 0... [ OK ] Listening on Provides websocket api network-manager for user 0. Starting Provides api network-manager for user 0... Starting Binding for Networking... [ OK ] Listening on Provides websocket api Bluetooth-Manager for user 0. Starting Expose Bluetooth Low Level APIs through AGL Framework... Starting Provides api Bluetooth-Manager for user 0... [ OK ] Started Provides api homescreen for user 0. [ OK ] Started Provides api windowmanager for user 0. [ OK ] Started Prov[ 14.588640] (stk) :skipping the wait event of change remote baud ides api unicens[ 15.460420] can: controller area network core (rev 20170425 abi 9) for user 0. [ 15.475595] NET: Registered protocol family 29 [ OK ] Started Provides api[ 15.491062] can: broadcast manager protocol (rev 20170425 t) weather for user 0. [ OK ] Started Provides api persistence for user 0. [ OK ] Started Provides api nfc for user 0. [ OK ] Started Provides api network-manager for user 0. [ OK ] Started Provides api Bluetooth-Manager for user 0. [ OK ] Started HomeScreen Binding service. [ OK ] Started /mnt/4995bda9-20d8-475c-986c.0+gitAUTOINC+3f1e9c8e1f-r0/build. [ OK ] Started Expose CAN Low Level APIs through AGL Framework. [ OK ] Started UNICENS V2 - Infotainment network setup and access. [ OK ] Started Window Manager. [ OK ] Started Binding for handling NFC access controls. [ OK ] Started Binding for GeoClue interface. [ OK ] Started Expose Bluetooth Low Level APIs through AGL Framework. [ OK ] Started Binding for Networking. Starting Location Lookup Service... Starting AGL identity service... Starting AGL High Level Interface for Audio... Starting This is a demo application for homescreen... Starting This is a demo application for launcher... [ OK ] Started Location Lookup Service. [ OK ] Started This is a demo application for launcher. [ OK ] Started This is a demo application for homescreen. [ OK ] Started AGL identity service. [ OK ] Created slice system-afm\x2dapi\x2dgeoclue.slice. Starting Initiate afm-user-setup 0... [ OK ] Started AGL High Level Interface for Audio. [ OK ] Reached target afm-user-session 0. [ OK ] Started Initiate afm-user-setup 0. Starting Provides api geoclue for user 0... [ OK ] Started Provides api geoclue for user 0. Starting Binding for weather interface... [ OK ] Started Binding for weather interface. [ 17.604483] BUG: Bad page state in process QSGRenderThread pfn:5c3fa [ 17.611102] page:ffff7e000070fe80 count:0 mapcount:-127 mapping: (null) index:0x5 [ 17.619530] flags: 0xfffc00000000000() [ 17.623359] raw: 0fffc00000000000 0000000000000000 0000000000000005 00000000ffffff80 [ 17.631160] raw: ffff7e000070fe60 ffff8005fff7c4b8 0000000000000001 0000000000000000 [ 17.639007] page dumped because: nonzero mapcount [ 17.643740] Modules linked in: can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce wlcore_sdio pvrsrvkm(O) rcar_can can_dev btwilink bluetooth st_drv ecdh_generic rfkill vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 17.675565] CPU: 0 PID: 4323 Comm: QSGRenderThread Tainted: G B O 4.14.0-yocto-standard #1 [ 17.684778] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 17.692166] Call trace: [ 17.694618] [] dump_backtrace+0x0/0x378 [ 17.700012] [] show_stack+0x14/0x20 [ 17.705061] [] dump_stack+0x9c/0xbc [ 17.710110] [] bad_page+0xe8/0x150 [ 17.715068] [] free_pages_check_bad+0x6c/0xa8 [ 17.720982] [] __free_pages_ok+0x274/0x280 [ 17.726635] [] __free_pages+0x30/0x48 [ 17.731859] [] unset_migratetype_isolate+0x21c/0x250 [ 17.738379] [] undo_isolate_page_range+0xec/0x110 [ 17.744640] [] alloc_contig_range+0x1f4/0x398 [ 17.750552] [] cma_alloc+0x10c/0x210 [ 17.755688] [] dma_alloc_from_contiguous+0x3c/0x48 [ 17.762036] [] __dma_alloc+0x7c/0x200 [ 17.767258] [] drm_gem_cma_create+0x8c/0x110 [ 17.773084] [] drm_gem_cma_dumb_create_internal+0x60/0xc8 [ 17.780041] [] rcar_du_dumb_create+0x4c/0x58 [ 17.785870] [] drm_mode_create_dumb_ioctl+0x84/0xa0 [ 17.792306] [] drm_ioctl_kernel+0x6c/0xf0 [ 17.797872] [] drm_ioctl+0x180/0x3b8 [ 17.803005] [] do_vfs_ioctl+0xa4/0x7d0 [ 17.808310] [] SyS_ioctl+0x7c/0x98 [ 17.813267] Exception stack(0xffff000023633ec0 to 0xffff000023634000) [ 17.819703] 3ec0: 0000000000000006 00000000c02064b2 0000ffffa7107538 0000ffffa7107538 [ 17.827526] 3ee0: 0000ffffa7107544 0000ffffa0001db8 0000000000000000 0000000000000000 [ 17.835348] 3f00: 000000000000001d 0000ffffa71087f0 0000000000000001 0000000000000000 [ 17.843170] 3f20: 0000000000000001 000000000000270f 0000000000000000 0000000000000000 [ 17.850992] 3f40: 0000ffffb7183fb8 0000ffffb9a99ef0 0000000000000002 0000ffffb6e08000 [ 17.858815] 3f60: 0000ffffa7107538 00000000c02064b2 0000000000000006 00000000000005d0 [ 17.866637] 3f80: 0000000000000440 0000ffffa71075c8 0000ffffa0001c70 0000ffffa0001288 [ 17.874459] 3fa0: 0000ffffb976c000 0000ffffa71074c0 0000ffffb716a114 0000ffffa71074c0 [ 17.882281] 3fc0: 0000ffffb9a99efc 0000000080000000 0000000000000006 000000000000001d [ 17.890102] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 17.897926] [] __sys_trace_return+0x0/0x4 [ 17.903718] BUG: Bad page state in process QSGRenderThread pfn:5c3fc [ 17.910242] page:ffff7e000070ff00 count:0 mapcount:-127 mapping: (null) index:0x5 [ 17.918562] flags: 0xfffc00000000000() [ 17.922339] raw: 0fffc00000000000 0000000000000000 0000000000000005 00000000ffffff80 [ 17.930122] raw: ffff8005fff7c520 ffff8005fff7c520 0000000000000002 0000000000000000 [ 17.938055] page dumped because: nonzero mapcount [ 17.942793] Modules linked in: can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce wlcore_sdio pvrsrvkm(O) rcar_can can_dev btwilink bluetooth st_drv ecdh_generic rfkill vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 17.974646] CPU: 0 PID: 4323 Comm: QSGRenderThread Tainted: G B O 4.14.0-yocto-standard #1 [ 17.983858] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 17.991247] Call trace: [ 17.993696] [] dump_backtrace+0x0/0x378 [ 17.999089] [] show_stack+0x14/0x20 [ 18.004137] [] dump_stack+0x9c/0xbc [ 18.009185] [] bad_page+0xe8/0x150 [ 18.014143] [] free_pages_check_bad+0x6c/0xa8 [ 18.020056] [] __free_pages_ok+0x274/0x280 [ 18.025710] [] __free_pages+0x30/0x48 [ 18.030933] [] unset_migratetype_isolate+0x21c/0x250 [ 18.037453] [] undo_isolate_page_range+0xec/0x110 [ 18.043714] [] alloc_contig_range+0x1f4/0x398 [ 18.049627] [] cma_alloc+0x10c/0x210 [ 18.054762] [] dma_alloc_from_contiguous+0x3c/0x48 [ 18.061110] [] __dma_alloc+0x7c/0x200 [ 18.066331] [] drm_gem_cma_create+0x8c/0x110 [ 18.072156] [] drm_gem_cma_dumb_create_internal+0x60/0xc8 [ 18.079113] [] rcar_du_dumb_create+0x4c/0x58 [ 18.084941] [] drm_mode_create_dumb_ioctl+0x84/0xa0 [ 18.091377] [] drm_ioctl_kernel+0x6c/0xf0 [ 18.096942] [] drm_ioctl+0x180/0x3b8 [ 18.102076] [] do_vfs_ioctl+0xa4/0x7d0 [ 18.107381] [] SyS_ioctl+0x7c/0x98 [ 18.112339] Exception stack(0xffff000023633ec0 to 0xffff000023634000) [ 18.118773] 3ec0: 0000000000000006 00000000c02064b2 0000ffffa7107538 0000ffffa7107538 [ 18.126595] 3ee0: 0000ffffa7107544 0000ffffa0001db8 0000000000000000 0000000000000000 [ 18.134418] 3f00: 000000000000001d 0000ffffa71087f0 0000000000000001 0000000000000000 [ 18.142239] 3f20: 0000000000000001 000000000000270f 0000000000000000 0000000000000000 [ 18.150061] 3f40: 0000ffffb7183fb8 0000ffffb9a99ef0 0000000000000002 0000ffffb6e08000 [ 18.157883] 3f60: 0000ffffa7107538 00000000c02064b2 0000000000000006 00000000000005d0 [ 18.165705] 3f80: 0000000000000440 0000ffffa71075c8 0000ffffa0001c70 0000ffffa0001288 [ 18.173527] 3fa0: 0000ffffb976c000 0000ffffa71074c0 0000ffffb716a114 0000ffffa71074c0 [ 18.181349] 3fc0: 0000ffffb9a99efc 0000000080000000 0000000000000006 000000000000001d [ 18.189171] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 18.196994] [] __sys_trace_return+0x0/0x4 [ 18.208531] alloc_contig_range: [5c200, 5c82d) PFNs busy [ 18.214041] alloc_contig_range: [5c300, 5c92d) PFNs busy [ 18.219509] alloc_contig_range: [5c400, 5ca2d) PFNs busy [ 18.224930] alloc_contig_range: [5c500, 5cb2d) PFNs busy [ 18.230386] alloc_contig_range: [5c600, 5cc2d) PFNs busy [ 18.235875] alloc_contig_range: [5c700, 5cd2d) PFNs busy Automotive Grade Linux 5.99.5 m3ulcb ttySC0 m3ulcb login: [ 22.073373] (stc): add_channel_to_table: id 4 [ 22.077767] (stc): add_channel_to_table: id 2 [ 22.082152] (stc): add_channel_to_table: id 3 [ 22.840537] Bluetooth: RFCOMM TTY layer initialized [ 22.845456] Bluetooth: RFCOMM socket layer initialized [ 22.850634] Bluetooth: RFCOMM ver 1.11 Automotive Grade Linux 5.99.5 m3ulcb ttySC0 m3ulcb login: root m3ulcb:~# hcic to- ol -i hci0 scan Scanning ... ^C m3ulcb:~# hcitool -i hci0 scan Scanning ... FC:45:96:03:00:C7 Q Marshal 2333 78:36:CC:B9:14:F2 n/a 94:65:2D:43:57:18 n/a E4:A7:A0:23:BF:49 n/a.rshal 2333 A4:34:D9:BE:61:70 n/a 1C:15:1F:F8:EF:E4 n/a E4:A7:A0:09:70:58 n/a m3ulcb:~# m3ulcb:~# m3ulcb:~# m3ulcb:~# cat /etc/os-release ID="poky-agl" NAME="Automotive Grade Linux" VERSION="5.99.5 (flounder)" VERSION_ID="5.99.5" PRETTY_NAME="Automotive Grade Linux 5.99.5 (flounder)" m3ulcb:~# m3ulcb:~# m3ulcb:~# m3ulcb:~# m3ulcb:~# m3ulcb:~#