Uploaded image for project: ' AGL Development'
  1. AGL Development
  2. SPEC-2729

Build failed with agl-sota for rpi3

XMLWordPrintable

    • Raspberry Pi 3

       I tried to build an image with the agl-sota functionnality:

      repo init -b guppy -m guppy_7.0.1.xml -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo.git
repo sync
git clone --branch rocko https://www.github.com/advancedtelematic/meta-updater-raspberrypi.git
source meta-agl/scripts/aglsetup.sh -m raspberrypi3 agl-demo agl-appfw-smack agl-sota

      I ensure that ${METADIR}/meta-updater-raspberrypi is added at BBLAYERS  in bblayers.conf, then I run

      bitbake agl-demo-platform

      Build fails with the following error:

      ERROR: create-combined-dtb-1.0.0-r1 do_compile: Function failed: do_compile (log file is located at /media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/work/armv7vehf-neon-vfpv4-agl-linux-gnueabi/create-combined-dtb/1.0.0-r1/temp/log.do_compile.4872)
ERROR: Logfile of failure stored in: /media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/work/armv7vehf-neon-vfpv4-agl-linux-gnueabi/create-combined-dtb/1.0.0-r1/temp/log.do_compile.4872
Log data follows:
| DEBUG: Executing shell function do_compile
| Couldn't open blob from '/media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/deploy/images/raspberrypi3/uImage-bcm2710-rpi-3-b-plus.dtb': No such file or directory
| 
| Failed to read base blob /media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/deploy/images/raspberrypi3/uImage-bcm2710-rpi-3-b-plus.dtb
| input  = /media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/deploy/images/raspberrypi3/uImage-bcm2710-rpi-3-b-plus.dtb
| output = uImage-bcm2710-rpi-3-b+vc4+ft5406.dtb
| overlay[0] = /media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/deploy/images/raspberrypi3/rpi-ft5406.dtbo
| overlay[1] = /media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/deploy/images/raspberrypi3/uImage-vc4-kms-v3d.dtbo
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/build/tmp/work/armv7vehf-neon-vfpv4-agl-linux-gnueabi/create-combined-dtb/1.0.0-r1/temp/log.do_compile.4872)
ERROR: Task (/media/sebastien/18b81cab-7f1d-4519-823f-adc569b21d87/AGL/workspace-agl/meta-agl/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb:do_compile) failed with exit code '1'

      The file uImage-bcm2710-rpi-3-b-plus.dtb is indeed missing.
      Please find in the attachements the content of  the workspace-agl/build/tmp/deploy/images/raspberrypi3/ directory given by "ls -l".

      What I could see so far is that meta-updater sets KERNEL_IMAGETYPE to "fitImage", then linux-raspberrypi recipe creates dtb files with a "zImage" prefix (is it the expected behavior?) and eventually create-combined-dtb task is looking for dtb files with a "uImage" prefix.

       

      Any advice?

      PS: build without agl-sota option runs successfully. 

       

        1. boot log.txt
          0.9 kB
        2. deploy_directory.txt
          2 kB
        3. dmesg.log
          23 kB
        # Subject Branch Project Status CR V
        22102,4 create-combined-dtb: Check if DTB files exist master AGL/meta-agl Status: MERGED +2 +1
        22107,3 create-combined-dtb: Check if DTB files exist halibut AGL/meta-agl Status: MERGED +2 +1
        22135,4 50_local.conf.inc: Extend DISTRO_FEATURES for sota master AGL/meta-agl Status: MERGED +2 +1
        22136,3 u-boot_2019.07.bbappend: Apply patch for AGL SOTA master AGL/meta-agl Status: MERGED +2 +1
        22137,1 default.xml: Update meta-updater master AGL/AGL-repo Status: MERGED +2 +1
        22138,1 default.xml: Add meta-updater-raspberrypi master AGL/AGL-repo Status: MERGED +2 +1
        22139,1 default-floating.xml: Add meta-updater-raspberrypi master AGL/AGL-repo Status: MERGED +2 +1
        22143,1 uEnv.txt: Modify uEnv.txt for SOTA master AGL/meta-agl Status: MERGED +2 +1
        22146,2 u-boot_2019.07.bbappend: Apply patch for AGL SOTA halibut AGL/meta-agl Status: MERGED +2 +1
        22147,2 uEnv.txt: Modify uEnv.txt for SOTA halibut AGL/meta-agl Status: MERGED +2 +1
        22285,1 agl_raspberrypi3.inc: Set CMA for SOTA master AGL/meta-agl Status: MERGED +2 +1
        22304,2 default.xml: Update meta-updater halibut AGL/AGL-repo Status: MERGED +2 +1
        22305,2 default.xml: Add meta-updater-raspberrypi halibut AGL/AGL-repo Status: MERGED +2 +1
        22306,1 default-floating.xml: Add meta-updater-raspberrypi halibut AGL/AGL-repo Status: MERGED +2 +1
        22307,1 50_local.conf.inc: Extend DISTRO_FEATURES for sota halibut AGL/meta-agl Status: MERGED +2 +1
        22308,2 agl_raspberrypi3.inc: Set CMA for SOTA halibut AGL/meta-agl Status: MERGED +2 +1

            leonanavi Leon Anavi
            sebMP Sébastien Marsaa-Poey
            Votes:
            0 Vote for this issue
            Watchers:
            4 Start watching this issue

              Created:
              Updated:
              Resolved: